For more detailed information, see the release notes in the Compose repo.
2.29.3#
{ { < release-date date="2024-09-12" > } }
Update#
- Dependencies upgrade: bump compose-go to v2.2.0
- Dependencies upgrade: bump docker engine and cli to v27.2.1
Bug fixes and enhancements#
- Combination of bind mount and
rebuild
are now allowed withwatch
. - Fixed a bug recreating containers when
--no-deps
is used withup
. - Fixed a bug not closing streams when reattaching containers.
- Restored recreation of anonymous volumes when using
-V
or--renew-anon-volumes
.
2.29.2#
{ { < release-date date="2024-08-16" > } }
Update#
- Dependencies upgrade: bump compose-go to v2.1.6
- Dependencies upgrade: bump docker engine and cli to v27.1.2
- Dependencies upgrade: bump buildx to v0.16.2
- Dependencies upgrade: bump buildkit to v0.15.2
- Dependencies upgrade: bump golang to v1.21.12
- Dependencies upgrade: bump sys to v0.22.0
- Dependencies upgrade: bump flock to v0.12.1
Bug fixes and enhancements#
- Fixed the docs on
docker compose kill
usage. - Fixed redundant condition from
toAPIBuildOptions
in build.go. - Fixed initial Watch
sync
after Compose restarts with introduction ofx-initSync
. - Fixed an issue which stopped the Compose process for a single container on
sync-restart
Watch action.
2.29.1#
{ { < release-date date="2024-07-23" > } }
Update#
- Dependencies upgrade: bump compose-go to v2.1.5.
- Dependencies upgrade: bump docker engine and cli to v27.1.0.
Bug fixes and enhancements#
- Enhance JSON progress events with more fields.
2.29.0#
{ { < release-date date="2024-07-17" > } }
Update#
- Dependencies upgrade: bump compose-go to v2.1.4
- Dependencies upgrade: bump docker engine and cli to v27.0.3
- Dependencies upgrade: bump buildx to 0.16.0
- Dependencies upgrade: bump buildkit to 0.15.0
- Dependencies upgrade: bump containerd to 1.7.19
Bug fixes and enhancements#
- Added a JSON stream progress writer.
- Added a
--prune
flag to thedocker compose watch
command. - Unnecessary resources are now excluded after services have been selected.
- Empty variables with no value are unset in containers.
2.28.1#
{ { < release-date date="2024-06-24" > } }
Bug fixes and enhancements#
- Fixed progress display, broken in
v2.28.0
, when TTY mode available.
2.28.0#
{ { < release-date date="2024-06-21" > } }
Update#
- Dependencies upgrade: bump compose-go to v2.1.3
- Dependencies upgrade: bump docker engine and cli to v27.0.1-rc.1
2.27.3#
{ { < release-date date="2024-06-21" > } }
Update#
- Dependencies upgrade: bump buildx to 0.15.1
- Dependencies upgrade: bump buildkit to 0.14.1
2.27.2#
{ { < release-date date="2024-06-20" > } }
Update#
- Dependencies upgrade: bump golang to 1.21.11
- Dependencies upgrade: bump docker engine and cli to v26.1.4
- Dependencies upgrade: bump buildx to 0.15.0
- Dependencies upgrade: bump buildkit to 0.14.0
- Dependencies upgrade: bump containerd to 1.7.18
Bug fixes and enhancements#
- Added an
--environment
flag to theconfig
command - Fixed a bug which caused the
watch
process to hang when used as flag with theup
command - Fixed usage of
COMPOSE_PROFILES
in.env
file
2.27.1#
{ { < release-date date="2024-05-24" > } }
Update#
- Dependencies upgrade: bump compose-go to v2.1.1
- Dependencies upgrade: bump docker engine and cli to v26.1.3
- Dependencies upgrade: bump buildx to 0.14.1
- Dependencies upgrade: bump containerd to 1.7.17
Bug fixes and enhancements#
- Added a navigation menu in the CLI where you can open your Compose file in Docker Desktop
- Added documentation for
--menu
flag indocker compose up
- Fixed a bug with
--resolve-image-digests
used with--no-interpolate
- You can now use a local
.env
file to overrideCOMPOSE_*
environment variables
2.27.0#
{ { < release-date date="2024-04-24" > } }
Update#
- Dependencies upgrade: bump golang to 1.21.9
- Dependencies upgrade: bump compose-go to v2.1.0
- Dependencies upgrade: bump docker engine and cli to v26.1.0
Bug fixes and enhancements#
- Introduced
--abort-on-container-failure
flag - Introduced
--all-resources
to not exclude resources not used by services - Introduced support for
build.entitlements
- Fixed a bug so Docker Compose now ignores missing containers when
docker compose down/stop -p
is run - Fixed support for
--flag=value
syntax in compatibility mode
2.26.1#
{ { < release-date date="2024-03-29" > } }
Update#
- Dependencies upgrade: opencontainers/image-spec v1.1.0
Bug fixes and enhancements#
- Added image pull failure reason in output
- Fixed crash when running up with
--no-build
and--watch
- Fixed crash when no TTY available and menu enabled
- Improved legibility of menu actions
2.26.0#
{ { < release-date date="2024-03-22" > } }
Update#
- Dependencies upgrade: bump compose-go v2.0.2
- Dependencies upgrade: bump docker v26.0.0
Bug fixes and enhancements#
- Reduced timeout of the Otel tracing command
- Fixed
config --format json
- Fixed documentation on default build image name
- Introduced Synchronized file shares for bind mounts in Compose
- Added support for
annotations
- Introduced
config --variables
to list Compose model variables - Added a navigation menu within
docker compose up
2.25.0#
{ { < release-date date="2024-03-15" > } }
Update#
- Dependencies upgrade: bump compose-go v2.0.0
Bug fixes and enhancements#
- Restored
config
behaviour until--no-interpolate
is set - Fixed service name shell completion
- Added
--watch
flag toup
command
2.24.7#
{ { < release-date date="2024-03-06" > } }
Update#
- Dependencies upgrade: bump golang to 1.21.8
- Dependencies upgrade: bump compose-go to 2.0.0-rc8
- Dependencies upgrade: bump docker to v24.0.4
Bug fixes and enhancements#
- Compose now ensures stable priority sort order for networks
- Fixed interpolation with curly braces (e.g. JSON) in default values
- Fixed validation for non-unique
container_name
values - Fixed validation for
develop.watch
- Fixed environment loading for
include
- Fixed panic when merging labels/networks
- Added support for
--no-path-resolution
when usinginclude
- Fixed missing project name errors
- Fixed
--no-interpolate
flag onconfig
- Added a workaround for file lock issues with Watch mode on Windows
- Fixed duplicate exit code status messages
- Compose now respects
COMPOSE_REMOVE_ORPHANS
onup
2.24.6#
{ { < release-date date="2024-02-15" > } }
Update#
- Dependencies upgrade: bump cli to 25.0.3
- Dependencies upgrade: bump compose-go to 2.0.0-rc.7
Bug fixes and enhancements#
- Fixed issue of
.env
file loading when project file is set viaCOMPOSE_FILE
variable - Aligned
ps --status=exited
behaviour with the Docker CLI behaviour - Fixed a deadlock when collecting large logs
2.24.5#
{ { < release-date date="2024-01-30" > } }
Bug fixes and enhancements#
- Fixed "failed to solve: changes out of order" errors when building images on Windows.
2.24.4#
{ { < release-date date="2024-01-29" > } }
Update#
- Dependencies upgrade: bump cli to 25.0.1
- Dependencies upgrade: bump docker to 25.0.1
- Dependencies upgrade: bump compose-go to 2.0.0-rc.3
Bug fixes and enhancements#
- Fixed issue when checking external network existence when swarm is enabled.
- Added support for
storage_opt
attribute.
2.24.3#
{ { < release-date date="2024-01-24" > } }
This release fixes a build issue with Docker Desktop for Windows introduced in Compose v2.24.0.
Update#
- Compose now uses a custom version of
fsutils
library.
2.24.2#
{ { < release-date date="2024-01-22" > } }
Update#
- Dependencies upgrade: bump cli to 25.0.0 GA
- Dependencies upgrade: bump compose-go to 2.0.0-rc.2
2.24.1#
{ { < release-date date="2024-01-18" > } }
Update#
- Dependencies upgrade: bump cli to 25.0.0-rc3
- Dependencies upgrade: bump docker to 25.0.0-rc3
- Dependencies upgrade: bump compose-go to 2.0.0-rc.1
- Dependencies upgrade: bump containerd to 1.7.12
Bug fixes and enhancements#
- Reworked the display of container status during
up
- Fixed the engine version required to use
healthcheck.start_interval
- Removed
watch
subcommand from thealpha
command - Fixed a bug when handling received signals
2.24.0#
{ { < release-date date="2024-01-11" > } }
Update#
- Dependencies upgrade: bump cli to 25.0.0-beta.3
- Dependencies upgrade: bump compose-go to 2.0.0-beta.3
- Dependencies upgrade: bump golang to 1.21.6
Bug fixes and enhancements#
- Introduced
docker compose attach
to attach local standard input, output, and error streams to a service's running container. - Introduced
docker compose stats
to display a live stream of container(s) resource usage statistics. - Introduced
docker compose ps --orphans
to include/exclude services not declared. - Introduced
docker compose logs --index
to select a replica container. - Introduced
docker compose build --with-dependencies
to also build dependencies. - Added source policies for build.
- Included disabled services for shell completion.
- Restored
Project
in ps JSON output. - Added OCI 1.0 fallback support for AWS ECR.
- Build now does not require environment to be resolved.
- Compose now sends out a cancel event on SIGINT/SIGTERM signal for
compose up
. - Fixed log by exposing services ports when
--verbose
. - Fixed inlined and environment-defined configs to be mounted under /\<id> until an explicit target is set.
- Fixed combination of
--pull always --no-build
. - Fixed race condition in log printer.
- Fixed
docker compose up
teardown when command context is cancelled.
2.23.3#
{ { < release-date date="2023-11-22" > } }
Update#
- Dependencies upgrade: bump buildx to v0.12.0
2.23.2#
{ { < release-date date="2023-11-21" > } }
Update#
- Dependencies upgrade: bump buildkit 0.12.3
- Dependencies upgrade: bump docker 24.0.7
- Dependencies upgrade: bump cli 24.0.7
- Dependencies upgrade: bump 1.20.2
Bug fixes and enhancements#
- Compose now supports
builds.tags
withpush
command. - Compose Watch now re-builds service images at startup.
- Now
--remove-orphans
doesn't manage disabled services as orphaned. - Compose displays
Building
output log only if there is at least one service to build.
2.23.1#
{ { < release-date date="2023-11-16" > } }
Update#
- Dependencies upgrade: bump compose-go to v1.20.1
Bug fixes and enhancements#
- Aligned Compose with OCI artifact best practices.
- Introduced
--resolve-image-digests
so users can seal service images by digest when publishing a Compose application. - Improved Compose Watch configuration logging.
- Compose now rejects a Compose file using
secrets|configs.driver
ortemplate_driver
. - Compose now fails to start if a dependency is missing.
- Fixed SIGTERM support to stop/kill stack.
- Fixed a
--hash
regression. - Fixed "Application failed to start after update" when an external network is on a watched service.
- Fixed
--pull
documentation. - Fixed display by adding newline in cmd/compose/build.go.
- Compose is rendered quiet after filtering applied.
- Stripped project prefix from docker-compose up output.
2.23.0#
{ { < release-date date="2023-10-18" > } }
Update#
- Dependencies upgrade: bump compose-go to v1.20.0
- Dependencies upgrade: bump containerd to 1.7.7
Bug fixes and enhancements#
- Added dry-run support for publish command
- Added
COMPOSE_ENV_FILES
env variable to pass a list of env files - Added
sync+restart
action tocompose watch
- Aligned
compose ps
output with Docker CLI by default and introduced--no-trunc
to keep the previous behaviour - Fixed hashes inconsistency between
up
andconfigure
- Enabled profiles when
down
ran with explicit service names - Fixed an issue when the pull policy provided was invalid
2.22.0#
{ { < release-date date="2023-09-21" > } }
[!NOTE]
The
watch
command is now generally available (GA). You can directly use it from the root commanddocker compose watch
. For more information, see File watch.
Update#
- Dependencies upgrade: bump golang to 1.21.1
- Dependencies upgrade: bump compose-go to v1.19.0
- Dependencies upgrade: bump buildkit to v0.12.2
Bug fixes and enhancements#
- Added experimental support for the
publish
command. - The command
watch
now builds and launches the project during startup. - Added
policy
option to the--pull
flag. - Fixed various race and deadlock conditions for
up
command on exit. - Fixed multi-platform issues on build.
- Enabled services that are explicitly requested even when their
profiles
aren't activated. - Fixed a
config
issue when the declaredenv_file
is missing. - Passed BuildOptions to
up
andrun
commands.
2.21.0#
{ { < release-date date="2023-08-30" > } }
[!NOTE]
The format of
docker compose ps
anddocker compose ps --format=json
changed to better align withdocker ps
output. See compose#10918.
Update#
- Dependencies upgrade: bump compose-go to v1.18.3
Bug fixes and enhancements#
- Changed
docker compose ps
anddocker compose ps --format=json
output to align with Docker CLI. - Added support for multi-document YAML files.
- Added support for loading remote Compose files from Git repos with
include
(experimental). - Fixed incorrect proxy variables during build.
- Fixed truncated container logs on container exit.
- Fixed "no such service" errors when using
include
with--profile
. - Fixed
.env
overrides when usinginclude
.
2.20.3#
{ { < release-date date="2023-08-11" > } }
Update#
- Dependencies upgrade: bump golang to 1.21.0
- Dependencies upgrade: bump compose-go to v1.18.1
- Dependencies upgrade: bump buildkit to v0.12.1
Bug fixes and enhancements#
- Improved speed and reliability of
watch
sync. - Added builder's name on the first build line.
- Improved shell completion for
--project-directory
and--profile
. - Fixed build issue with proxy configuration not passing to legacy builder.
- Removed unnecessary warning when an option dependency exists successfully.
2.20.2#
{ { < release-date date="2023-07-19" > } }
Bug fixes and enhancements#
- Added support for the
depends_on.required
attribute. - Fixed an issue where build tries to push unnamed service images.
- Fixed a bug which meant the target secret path on Windows was not checked.
- Fixed a bug resolving build context path for services using
extends.file
.
2.20.1#
{ { < release-date date="2023-07-18" > } }
Update#
- Dependencies upgrade: bump golang to 1.20.6
- Dependencies upgrade: bump buildx to v0.11.2
- Dependencies upgrade: bump buildkit to v0.12
- Dependencies upgrade: bump docker-cli to v24.0.5-dev
2.20.0#
{ { < release-date date="2023-07-11" > } }
Update#
- Dependencies upgrade: bump docker/cli-docs-tools to v0.6.0
- Dependencies upgrade: bump docker to v24.0.4
- Dependencies upgrade: bump buildx to v0.11.1
Bug fixes and enhancements#
- Introduced the
wait
command. - Added support of
--builder
andBUILDX_BUILDER
to thebuild
command. - Added support for the
include
andattach
attributes from the Compose Specification. - Fixed a DryRun mode issue when initializing CLI client.
- Fixed a bug with random missing network when a service has more than one.
- Fixed the Secrets file permission value to comply with the Compose Specification.
- Fixed an issue about
no-deps
flag not being applied. - Fixed some source code comments.
- Fixed a bug when
--index
is not set select. - Fixed a process leak in the wait e2e test.
- Improved some test speeds.
2.19.1#
{ { < release-date date="2023-06-29" > } }
Update#
- Dependencies upgrade: bump compose-go to v1.15.1
Bug fixes and enhancements#
- Fixed sporadic "container not connected to network" errors on
compose up
. - Fixed "please specify build context" errors on
compose build
. - Compose now warns if using a bind mount in a service
watch
configuration.
2.19.0#
{ { < release-date date="2023-06-21" > } }
Update#
- Dependencies upgrade: bump compose-go to v1.15.0
- Dependencies upgrade: bump buildx to v0.11.0
- Dependencies upgrade: bump docker to v24.0.2
- Dependencies upgrade: bump golang to 1.20.5
Bug fixes and enhancements#
- Introduced the ability to select a single service to be stopped by
compose down
. - Added
--progress
as top-level flag to configure progress UI style. - Introduced
run --cap-add
to run maintenance commands using service image. - Fixed a bug during detection of swarm mode.
- Fixed a bug when setting the project name via
COMPOSE_PROJECT_NAME
environment variable. - Adjusted the display of the volumes flag with the help of
down
command. - Fixed a bug in the
up
command which should not silently ignore missingdepends_on
services. - Aligned forward signal to container behaviour with the
docker run
one. - Compose now detects network name conflict.
- Fixed a typo in the warning message about an existing volume.
- Compose now detects new services started after
compose -p x logs -f
command. - Fixed a bug when
compose
was used as project name. - Fixed a bug in the
watch
command when a directory does not exist. - Removed default timeout of 10 seconds when restarting or stopping services.
- Fixed a bug in
watch
which applied the "rebuild" strategy by default. - Fixed a race condition, waiting for containers when one exit.
- Added a warning telling users that uid,gid,mode are not implemented for
build.secrets
. - Fixed a bug in
watch
which was watching the whole build context instead of only configured paths. - Compose now sorts containers by creation date to scale down the older ones first.
- Fixed a bug in the docs generation task for Windows environments.
- Updated the docs to reflect Dry Run mode is feature complete.
- Improved the diagnostic message on network label mismatch.
- Fixed a bug which was rendering
Building
section when there was no build involved. - Fixed a bug in code coverage metrics.
- Added OTEL initialization.
- Added a GitHub action to trigger Docker Desktop e2e tests with Compose edge versions.
- Added more ignore rules to dependabot.
2.18.1#
{ { < release-date date="2023-05-17" > } }
Bug fixes and enhancements#
- Fixed "Image not found" errors when building images
2.18.0#
{ { < release-date date="2023-05-16" > } }
Update#
- Dependencies upgrade: bump compose-go to v1.13.5
- Dependencies upgrade: bump buildkit to v0.11.6
- Dependencies upgrade: bump docker to v23.0.5
Bug fixes and enhancements#
- Added dry run support using
--dry-run
- Added the first (alpha) implementation of the
viz
sub-command - Introduced
--no-path-resolution
to skip relative path to be resolved - Introduced
COMPOSE_ANSI
to define the--ansi
default value - Introduced
COMPOSE_STATUS_STDOUT
to get status messages sent to stdout - Fixed the BuildKit progressui integration
- Fixed a bug to stop blocking the events loop collecting logs
- Restored support for
--memory
- Fixed a bug which meant containers didn't stop after termination
- Compose now lets users declare the build secret target
- Fixed a bug which caused a container to be recreated when the config has not changed
- Fixed a race condition when
--parallel
is used with a large number of dependent services - Compose now checks the local image matches the required platform
- Fixed local image removal when
compose down
is ran with--project-name
- Compose now detects the active endpoint trying to remove the network and skips with a warning
- Removed unnecessary [] output
- Compose detects that a Windows terminal is not a
console.File
to avoid a panic --parallel
now has precedence overCOMPOSE_PARALLEL_LIMIT
- Compose now reports that the external network is not found when Swarm is disabled
2.17.2#
{ { < release-date date="2023-03-26" > } }
Update#
- Dependencies upgrade: bump compose-go to v1.13.2
Bug fixes and enhancements#
- Fixed invalid project name error for directories with uppercase characters or
.
in the name. Fixed compose#10405
2.17.1#
{ { < release-date date="2023-03-24" > } }
Update#
- Dependencies upgrade: bump buildkit to v0.11.5
- Dependencies upgrade: bump compose-go to v1.13.1
- Dependencies upgrade: bump golang to 1.20.2
Bug fixes and enhancements#
- Fixed panic on
alpha watch
command. Pull Request compose#10393 - Prevented conflicts for services named
extensions
. Fixed compose-go#247 - Compose now validates project names more consistently. Fixed compose-go#363
2.17.0#
{ { < release-date date="2023-03-23" > } }
Upgrade notes#
- Project name validation is more strictly enforced. Project names can only include letters, numbers,
_
,-
and must be lowercase and start with a letter or number. - Boolean fields in YAML must be either
true
orfalse
. Deprecated YAML 1.1 values such as "on" or "no" are not supported. - Duplicate YAML merge keys (
<<
) are rejected.
Update#
- Dependencies upgrade: bump buildkit to v0.11.4
- Dependencies upgrade: bump buildx to v0.10.4
- Dependencies upgrade: bump containerd to 1.6.18
- Dependencies upgrade: bump compose-go to v1.13.0
Bug fixes and enhancements#
- Introduced
--wait-timeout
onup
command. Fixed compose#10269 - Made
compose service --hash
output sort by service name. Pull Request compose#10278 - Compose now renders a compact TUI progress report to monitor layers download. Pull Request compose#10281
- Introduced
restart
fordepends_on
. Fixed compose#10284 - Added support of
NO_COLOR
env var. Fixed compose#10340 - Progress writer now uses
dockercli.Err
stream. Fixed compose#10366 - Added support for
additional_contexts
in thebuild
service configuration. Fixed compose#9461 compose#9961 - Added file delete/rename handling in
watch
mode. Pull Request compose#10386 - Introduced an
ignore
attribute inwatch
mode. Pull Request compose#10385 - Compose now uses progress writer to show copies status. Pull Request compose#10387
- Updated reference documentation for
-p
/--project-name
flag. Fixed docs#16915, compose-spec#311 - Introduced a
replace
label to track the relationship between old and new containers of a service. Fixed compose#9600 - Fixed a bug that meant dependent services were not restarted after a service was restarted. Fixed compose#10263
- Compose now ignores services without a build section in
watch
mode. Fixed compose#10270 - Compose now applies config options for pseudo-subcommands. Fixed compose#10286
- Compose manages only containers with config_hash labels (i.e, created by compose). Fixed compose#10317
- Compose triggers an error if the project name is empty after normalization. Fixed compose#10313
- Compose restarts only needed services by checking
depends_on
relations. Fixed compose#10337 - Fixed a display issue on small terminals. Fixed compose#10322
- Fixed an issue with building the built images IDs collection. Pull Request compose#10372
- Use configured name separator to define oneoff container name. Fixed compose#10354
- Fixed concurrent map read/write issue when recreating containers. Fixed compose#10319
- Compose now supports Dry Run mode for
stop
andrm
commands. Pull Request compose#10257 - Compose now supports Dry Run mode for
pull
command. Pull Request compose#10341 - Compose now supports Dry Run mode for
push
command. Pull Request compose#10355 - Compose now supports Dry Run mode for
exec
command. Pull Request compose#10252 - Compose now supports Dry Run mode for
restart
command. Pull Request compose#10339
2.16.0#
{ { < release-date date="2023-02-08" > } }
Update#
- Dependencies upgrade: bump docker to v23.0.0
- Dependencies upgrade: bump docker-cli to v23.0.0
- Dependencies upgrade: bump buildkit to v0.11.2
- Dependencies upgrade: bump buildx to v0.10.2
- Dependencies upgrade: bump containerd to 1.6.16
- Dependencies upgrade: bump golang to 1.20
Bug fixes and enhancements#
- Introduced
--remove-orphans
for thecompose create
command. Fixed compose#9718 - Shortened the TTY output when the terminal is too small. Fixed compose#9962
- Added
remove-orphans
functionality to run. Fixed compose#9718 - Introduced the experimental
watch
command. Pull Request compose#10163 - Compose now allows TTY to be allocated with
-t
. Fixed compose#10161 - Introduced the experimental
dry-run
command. Pull Request compose#10173 - Updated the documentation to explain ways to configure parallelism. Pull Request compose#10198
- Aligned the
logs
command with docker CLI by aliasing-n
for--tail
. Fixed compose#10199 - Added support for
docker compose build --push
. Pull Request compose#10148 - Added
--scale
to thecompose create
command. Fixed compose#10208 - Renamed
convert
toconfig
to align with the Compose V1 UX. Pull Request compose#10214 - Compose now passes the proxy config as build args. Fixed compose#8797
- Fixed parsing issue in
compose up
by ignoring containers not created by Compose. Fixed compose#10162 - Fixed the goroutine leak in log formatter initialization. Fixed compose#10157
- Fixed an issue where compose logs don't exit when all running containers have been stopped. Pull Request compose#10181
- Fixed the documentation to reflect
docker compose ps
being aligned withdocker ps
. Pull Request compose#10195 - Fixed an issue where the remote Buildx driver was not found. Fixed compose#9893
- Improved logging when recreating a service container. Pull request compose#10236
- Fixed an issue so Compose now only waits for containers concerned by the wait condition. Fixed compose#10200
- Compose now prevents assignment to entry in nil map. Fixed compose#10244
- Added a dedicated GitHub Action workflow for Cucumber tests. Pull Request compose#10165
- Cleaned the TUI lines when switching in compact log mode. Fixed compose#10201
- Added Tilt watcher to detect code changes in watch mode. Pull Request compose#10218
- Compose now supports Dry Run mode for
kill
command. Fixed compose#10210 - Compose now supports Dry Run mode for
pause
command.Fixed compose#10217 - Compose now supports Dry Run mode for
cp
command.Fixed compose#10235
2.15.1#
{ { < release-date date="2023-01-09" > } }
Update#
- Dependencies upgrade to fix Golan CVE-2022-27664 and CVE-2022-32149
Bug fixes and enhancements#
- Added support for UTS namespace. Fixed compose#8408
- Fixed filtering issue when no filter set. Fixed roadmap#418
- Fixed concurrent map writes issue during build step. Pull Request compose#10151
- Fixed issue when stdin is not a terminal. Fixed compose#9739
2.15.0#
{ { < release-date date="2023-01-05" > } }
Update#
- Dependencies upgrade: bump compose-go to v1.8.1
- Dependencies upgrade: bump cli-docs-tool to 0.5.1
Bug fixes and enhancements#
- Added support of the
privileged
attribute in theservice.build
section. Pull Request compose#10112 - Introduced
--ignore-buildable
to ignore buildable images on pull. Fixed compose#8805 - Introduceed
--no-attach
to ignore some service outputs. Fixed compose#8546 - Fixed issue with
logs
whendriver:none
is set. Fixed compose#9030 - Compose now relies on dockerCLI.streams. Pull Request compose#10082
- Fixed issue with service hash that MUST exclude replicas. Fixed compose#10077
- Compose now checks service names based on project, not running containers. Fixed compose#9951
- Fixed security opts support (seccomp and unconfined). Fixed compose#9505
- Fixed empty file when using compose config in case of smaller source files. Fixed compose#10121
- Fixed issue with
--pull
not applied oncompose up
. Fixed compose#10125 - Compose should ignore not only auto-removed containers but also "removal in progress" for orphan containers. Pull Request compose#10136
- Compose limits build concurrency according to
--parallel
. Fixed compose#9091
2.14.2#
{ { < release-date date="2022-12-20" > } }
Update#
- Dependencies upgrade: bump containerd to 1.6.14
Bug fixes and enhancements#
- Compose now uses DOCKER_DEFAULT_PLATFORM to determine the platform when creating a container. Fixed compose#10041
- Compose now detects when dependency failed to start. Fixed compose#9732
- Fixed WCOW volume mounts. Fixed compose#9577
- List only running containers when using
--all=false
. Fixed compose#10085 - Fixed a regression when running pull
--ignore-pull-failures
. Fixed compose#10089 - Fixed CPU quota issue. Fixed compose#10073
- Fixed race condition on compose logs. Fixed compose#8880
- Updated projectOptions to be public by renaming it to ProjectOptions. Fixed compose#100102
2.14.1#
{ { < release-date date="2022-12-15" > } }
Updates#
- Dependencies upgrade: bump Go to 1.19.4
- Dependencies upgrade: bump containerd to 1.6.12
Bug fixes and enhancements#
- Added
--parallel
to limit concurrent engine calls. Pull Request compose#10030 - Distinguished stdout and stderr in
up
logs. Fixed compose#8098 - Aligned
compose ps
output withdocker ps
. Fixed compose#6867 - Added
--include-deps
to push command. Pull Request compose#10044 - Introduced
--timestamp
option oncompose up
. Fixed compose#5730 - Compose now applies uid/gid when creating a secret from the environment. Pull Request compose#10084
- Fixed deadlock when waiting for attached-dependencies. Fixed compose#10021
- Fixed race condition when collecting pulled images IDs. Fixed compose#9897
- Compose doesn't stop the
pull
command for images that can be built. Fixed compose#8724 - Fixed corner case when there's no container to attach to. Fixed compose#8752
- Compose containers' startup must run sequentially for engine to assign distinct ports within a configured range. Fixed compose#8530
- Fixed parsing of
repository:tag
. Fixed compose#9208 - Load project from files when explicitly set by user. Fixed compose#9554
2.14.0#
{ { < release-date date="2022-12-02" > } }
Updates#
- Dependencies upgrade: bump compose-go to v1.8.0
- Dependencies upgrade: bump Go to 1.19.3
Bug fixes and enhancements#
- Added
oom_score_adj
field to service definition. Pull Request compose#10019 - Added mode field for tmpfs mount permissions. Pull Request compose#10031
- Compose now only stops services started by
up
when interrupted. Fixed compose#10028 - Compose now loads implicit profiles for targeted services. Fixed compose#10025
- Compose does not require
service.build.platforms
to be set ifservice.platform
is set. Fixed compose#10017 - Plain output is used during buildx image builds if
--ansi=never
is set. Fixed compose#10020 COMPOSE_IGNORE_ORPHANS
environment variable now behaves more consistently. Fixed compose#10035- Compose now uses the correct image name separator in
convert
. Fixed compose#9904 - Fixed
run
for services usingnetwork_mode: service:NAME
. Fixed compose#10036
2.13.0#
{ { < release-date date="2022-11-23" > } }
Updates#
- Dependencies upgrade: bump containerd to 1.6.10
- Dependencies upgrade: bump docker-credential-helpers to v0.7.0
- Update CI dependencies. Pull Request compose#9982
Bug fixes and enhancements#
- Added a
no-consistency
option toconvert
command. Fixed compose#9963 - Added a
build
option torun
command. Fixed compose#10003 - Fixed mapping
restart_policy.condition
to engine supported values. Fixed compose#8756, docs#15936 - Fixed missing support of
deploy.reservation.memory
. Fixed compose#9902 - Fixed a bug to prevent usage of
COMPOSE_PROFILES
when--profile
arg is used. Fixed compose#9895 - Fixed a bug to prevent pulling a service's image when depending on a service which will build this image. Fixed compose#9983
- Fixed parsing issue when a container number label is not found. Fixed compose#10004
- Compose now uses the platform value defined by
DOCKER_DEFAULT_PLATFORM
when noservice.platform
defined. Fixed compose#9889 - Removed usage of the deprecated dependency
gotest.tools
v2. Pull Request compose#9935 - Excluded issues labeled with
kind/feature
from stale bot process. Fixed compose#9988
2.12.2#
{ { < release-date date="2022-10-21" > } }
Updates#
- Updated Docker Engine API to restore compatibility with Golang 1.18 needed for Linux packaging. Pull Request compose#9940
For the full change log or additional information, check the Compose repository 2.12.2 release page.
2.12.1#
{ { < release-date date="2022-10-21" > } }
Security#
- Updated Docker Engine API to apply fix of CVE-2022-39253. Pull Request compose#9934
For the full change log or additional information, check the Compose repository 2.12.1 release page.
2.12.0#
{ { < release-date date="2022-10-18" > } }
Updates#
- CI update to the documentation repository path
-
Upgraded to compose-go from 1.5.1 to 1.6.0
-
Updated to go 1.19.2 to address CVE-2022-2879, CVE-2022-2880, CVE-2022-41715
Bug fixes and enhancements#
- Added a
quiet
option when pushing an image. Fixed compose#9089 - Fixed a misleading error message for
port
command. Pull Request compose#9909 - Fixed a bug to prevent failure when Compose tries to remove a non-existing container. Fixed by compose#9896
- Switched GitHub issue template form
For the full change log or additional information, check the Compose repository 2.12.0 release page.
2.11.2#
{ { < release-date date="2022-09-27" > } }
[!NOTE]
- Updates on environment file syntax & interpolation: see compose#9879
- Setting
DOCKER_HOST
via.env
files is not supported in Compose v2
Updates#
- Upgraded to compose-go from 1.5.1 to 1.6.0
Bug fixes and enhancements#
- Fixed a bug to prevent "invalid template" errors on valid environment variable values. Fixes compose##9806, compose##9746, compose##9704, compose##9294
- Fixed a bug to ensure new images from
docker compose build
are used. Fixes compose#9856 - Fixed cross-architecture builds when
DOCKER_DEFAULT_PLATFORM
not set. Fixes compose#9864 - Fixed intermittent conflict errors when using
depends_on
. Fixes compose#9014 - Cleared service
CMD
when entry point is overridden. Fixes compose#9622 - Configured default builder export when no
build.platforms
defined. Fixes compose#9856 - Fixed a bug to keep the platform defined, in priority, via DOCKER_DEFAULT_PLATFORM or the
service.platform
attribut. Fixes compose#9864 - Removed support for
DOCKER_HOST
in.env
files. Fixes compose#9210 - Fixed a bug to ensure clean service command if entry point is overridden in run command. Fixes compose#9622
- Deps: fixed race condition during graph traversal. Fixes compose#9014
- CI now runs on Windows & macOS including E2E tests via Docker Desktop
- Added more information when
service.platform
isn't part ofservice.build.platforms
- GitHub Workflows security hardening
For the full change log or additional information, check the Compose repository 2.11.2 release page.
2.11.1#
{ { < release-date date="2022-09-20" > } }
Bug fixes and enhancements#
- Fixed a bug to keep
depends_on
condition when service hasvolumes_from
. Fixes compose#9843 - Fixed a bug to keep the platform defined at service level during build if no build platforms. Fixes compose#9729
- Fixed a bug to keep the platform defined via DOCKER_DEFAULT_PLATFORM during build if no build platforms provided. Fixes compose#9853
For the full change log or additional information, check the Compose repository 2.11.1 release page.
2.11.0#
{ { < release-date date="2022-09-14" > } }
Updates#
- Dependencies upgrade: bump Golang to 1.19.1
- Dependencies upgrade: bump github.com/docker/go-units from 0.4.0 to 0.5.0
- Dependencies upgrade: bump github.com/cnabio/cnab-to-oci from 0.3.6 to 0.3.7
- Dependencies upgrade: bump go.opentelemetry.io/otel from 1.9.0 to 1.10.0
- Dependencies upgrade: bump github.com/AlecAivazis/survey/v2 from 2.3.5
- Dependencies upgrade: bump go.opentelemetry.io/otel from 1.4.1 to 1.9.0
- Dependencies upgrade: bump compose-go from 1.5.0 to 1.5.1
Bug fixes and enhancements#
- Added platforms build. Fixes compose-spec#267
- Logs now filter to services from current Compose file. Fixes compose#9801
- Added an improved output warning when pulling images. Fixes compose#9820
- Fixed a bug to ensure correct capture of exit code when service has dependencies. Fixes compose#9778
- Fixed
down
with--rmi
. Fixes compose#9655 - Fixed docker-compose convert that turns $ into $$ when using the --no-interpolate option. Fixes compose#9160
- Fixed
build.go
access custom labels directly cause panic. See compose#9810 - Applied newly loaded envvars to "DockerCli" and "APIClient". Fixes compose#9210
- Only attempt to start specified services on
compose start [services]
. Fixes compose#9796 compose#9807 - Label built images for reliable cleanup on
down
. Fixes compose#9655
For the full change log or additional information, check the Compose repository 2.11.0 release page.
2.10.2#
{ { < release-date date="2022-08-26" > } }
Bug fixes and enhancements#
- Properly respect
DOCKER_TLS_VERIFY
andDOCKER_CERT_PATH
environment variables. Fixes compose#9789. - Improved
Makefile
used in docker/docker-ce-packaging#742.
For the full change log or additional information, check the Compose repository 2.10.2 release page.
2.10.1#
{ { < release-date date="2022-08-24" > } }
Updates#
- Dependencies update: Bumped github.com/moby/buildkit from 0.10.3 to 0.10.4.
Bug fixes and enhancements#
- Fixed image pulls being skipped when
pull_policy
was not set. Fixes compose#9773. - Restored
.sha256
checksum files in release artifacts. Fixes compose#9772. - Removed error message showing exit code when using --exit-code-from. Fixes compose#9782.
- Fixed
compose pull
to pull images even when they existed locally iftag=latest
. - CI: Fixed checksums checking and brought back individual checksum files.
For the full change log or additional information, check the Compose repository 2.10.1 release page.
2.10.0#
{ { < release-date date="2022-08-19" > } }
New#
- Applied newly loaded environment variables to
DockerCli
andAPIClient
. Fixes compose#9210. - Added support for windows/arm64 and linux/riscv64.
Updates#
- Updated Dockerfile syntax to latest stable and renamed docs Dockerfile.
- Dependencies update: Upgraded BuildKit & docker/distribution.
- Dependencies update: Updated Docker CLI version used in CI to v20.10.17.
- Dependencies update: Bumped github.com/containerd/containerd from 1.6.6 to 1.6.7.
- Dependencies update: Bump github.com/containerd/containerd from 1.6.7 to 1.6.8.
- Dependencies update: Bumped to Go 1.18.5.
- Dependencies update: Bumped github.com/cnabio/cnab-to-oci from 0.3.5 to 0.3.6.
Bug fixes and enhancements#
- Reverted environment variables precedence to OS over
.env
file. Fixes compose#9737. - Updated usage strings for consistency.
- Resolved environment variables case-insensitively on Windows. Fixes compose#9431.
- Fixed
compose up
so dependency containers aren't stopped when a stop signal is issued. This keeps parity with v1 behavior-wise. - Fixes compose#9696.
- Fixed commands that start/restart/pause/unpause so that, if ran from the Compose file, the Compose model is also applied. Fixes compose#9705 and compose#9705.
- Removed extra whitespaces in help text of some subcommands.
- Fixed
compose create
to not override service pull policy when the value from the command line is configured as the default. Fixes compose#9717. - Filtered out "commandConn.Close- warning" message. Fixescompose#8544.
- Fixed up/start/run to not wait for disabled dependency. Fixes compose#9591.
- Applied Compose model on
compose kill
, added--remove-orphans
option. Fixes compose#9742. - Fixed
compose pull
to avoid pulling the same images multiple times. Fixes compose#8768. - Fixed version of golangci-lint to v1.47.3, issue with v1.48.0 for now.
For the full change log, check the Compose repository 2.10.0 release page.
2.9.0#
{ { < release-date date="2022-08-7" > } }
[!IMPORTANT]
Compose v2.9.0 contains changes to the environment variable's precedence that have since been reverted. We recommend using v2.10+ to avoid compatibility issues.
[!NOTE]
This release reverts the breaking changes introduced in Compose v2.8.0 by
compose-go v1.3.0
.
Updates#
- Updated
compose-go
to v1.4.0 as previous version introduced breaking changes. Fixes compose#9700.
Bug fixes and enhancements#
- Overwritten parent commands PreRun code for
compose version
. Fixes compose#9698. - Fixed
LinkLocalIPs
in V2. Fixes compose#9692. - Linked to
BUILDING.md
for testing instructions. Fixes compose#9439.
For the full change log or additional information, check the Compose repository 2.9.0 release page.
2.8.0#
{ { < release-date date="2022-07-29" > } }
[!IMPORTANT]
This release introduced a breaking change via
compose-go v1.3.0
and this PR. In this release, Docker Compose recreates new resources (networks, volumes, secrets, configs, etc.) with new names, using a-
(dash) instead an_
(underscore) and tries to connect to or use these newly created resources instead of your existing ones!Please use Compose the v2.9.0 release instead.
New#
- Introduced
--pull
flag to allow the force pull of updated service images. Fixes compose#9451. - Increased code quality by adding
gocritic
to the linters.
Bug fixes and enhancements#
- Fixed interpolation error message output. Fixes compose-spec/compose-go#292.
- Defined precedence of the environment variables evaluation. Fixes compose#9521, compose#9638, compose#9608, compose#9578. compose#9468, and compose#9683.
- Docs CI: Fixed to use push-to-fork when creating a PR.
- Used environmental variable for golang's version and updates GitHub Actions from v2 to v3.
- Used google/addlicense instead of kunalkushwaha/ltag.
For the full change log or additional information, check the Compose repository 2.8.0 release page.
2.7.0#
{ { < release-date date="2022-07-20" > } }
New#
- Added support for environment secrets during build step. Fixes compose#9606.
Updates#
- Dependencies upgrade: bumped go to 1.18.4.
- Dependencies upgrade: bumped compose-go to v1.2.9.
Bug fixes and enhancements#
- Networks: prevented issues due to duplicate names. Fixes moby/moby#18864.
- Fixed issue with close networks name on
compose up
andcompose down
commands. Fixes compose#9630. - Used appropriate dependency condition for one-shot containers when running
compose up --wait
. Fixes compose#9606. - Fixed environment variable expansion.
- Validated depended-on services exist in consistency check. Fixes compose#8910.
- Fixed hash usage in environment values. Fixes compose#9509.
- Docker Build: added fix to respect dependency order for classic builder. Fixes compose#8538.
- Fixed panic caused by empty string argument. Fixes compose-switch#35.
- Fixed start/restart as to not impact one-off containers. Fixes compose#9509.
- Fixed to keep the container reference when
volumes_from
targets a container and not a service. Fixes compose#8874. - build.go: added fix to initialize
CustomLabels
map ifnil
. - Added new targets to build Compose binary before running e2e tests.
- CI: released workflow to open a PR on docs repo with latest changes.
- e2e: added test for
ps
. - e2e: split out pause tests and add more cases.
- e2e: add more start/stop test cases.
For the full change log or additional information, check the Compose repository 2.7.0 release page.
2.6.1#
{ { < release-date date="2022-06-23" > } }
New#
- Added support for setting secrets from environment variable. Fixes compose-spec/compose-spec#251.
Updates#
- Upgrade: compose-go v1.2.8.
- Upgrade: buildx v0.8.2.
- Dependencies upgrade: bumped runc to 1.1.2.
- Dependencies upgrade: bumped golang to 1.18.3.
- Dependencies upgrade: bumped compose-go to v1.2.8.
- Dependencies upgrade: bumped github.com/theupdateframework/notary from 0.6.1 to 0.7.0.
- Dependencies upgrade: bumped github.com/cnabio/cnab-to-oci from 0.3.1-beta1 to 0.3.3.
- Dependencies upgrade: bumped github.com/hashicorp/go-version from 1.3.0 to 1.5.0.
- Dependencies upgrade: bumped github.com/stretchr/testify from 1.7.0 to 1.7.2.
- Dependencies upgrade: bumped github.com/docker/buildx from 0.8.1 to 0.8.2.
- Dependencies upgrade: bumped github.com/AlecAivazis/survey/v2 from 2.3.2 to 2.3.5.
- Dependencies upgrade: bumped github.com/containerd/containerd from 1.6.2 to 1.6.6.
Bug fixes and enhancements#
- Added links to container create request. Fixes #9513.
- Fixed
compose run
to start only direct dependencies. Fixes #9459. - Fixed
compose up
'service not found' errors when using--no-deps
option. Fixes #9427. - Fixed
compose down
to respectCOMPOSE_REMOVE_ORPHANS
environment variable. Fixes #9562. - Fixed project-level bind mount volumes. Fixes docker/for-mac#6317.
- Fixed parsing of properties
deploy.limits.cpus
anddeploy.limits.pids
to respect floating-point values. Fixes #9542 and #9501. - Fixed
compose ps
output to list all exposed ports. Fixes #9257. - Fixed spelling mistakes in
compose ps
code. - Fixed
docker compose
to honor--no-ansi
even when deprecated option is requested. - Fixed network name and network ID possible ambiguity.
- e2e: added test for
ps
. - e2e: unmarshalled json into container summaries.
- e2e: fixed subtests and block parallel unsafe tests.
- e2e: isolated test command env from system env.
- e2e: fixed spurious
ps
failures. - e2e: ensured all compose commands standalone compatible.
- e2e: improved test output on failures.
For the full change log or additional information, check the Compose repository 2.6.1 release page.
2.6.0#
{ { < release-date date="2022-05-30" > } }
New#
- Added the tags property to the build section. In this property tags can be defined to be applied to the final image, in addition to the one defined in the image property.
- Added end-to-end tests to ensure there is no regression on environment variables precedence.
- Added ddev's end-to-end test.
Updates#
- Dependencies update: bumping compose-go to 1.2.6.
- Dependencies update: bumping compose-go to 1.2.7.
- Dependencies update: bumping golang to 1.18.
Bug fixes and enhancements#
- Fixed
compose up
to attach only to services declared in project with enabled profiles. Fixes #9286. - Fixed flickering prompt when pulling same image from multiple services. Fixes #9469.
- Fixed compose go to import .env file to OS environment to allow setting variables (such as DOCKER_BUILDKIT) through this file. Fixes #9345.
- Fixed
TestLocalComposeUp
that failed locally. - Fixed local run of make
e2e-compose-standalone
.
For the full change log or additional information, check the Compose repository 2.6.0 release page.
2.5.1#
{ { < release-date date="2022-05-17" > } }
Updates#
- Dependencies updates: bumping compose-go to 1.2.5.
Bug fixes and enhancements#
- Fixed resolution of project's working directive absolute path when a relative path is declared using '--env-file'. Fixes docker/for-mac#6229.
- Fixed
compose down
: now rejects all arguments in order to clarify usage. Fixes #9151. - Fixed
compose down
: now exits with status=0 if there is nothing to remove. Fixes #9426. - Fixed extra space printed in logs output lines with --no-log-prefix option. Fixes #9464.
- Clarified what the default work dir is when multiple compose files are passed.
- cp command: copy to all containers of a service as default behavior.
For the full change log or additional information, check the Compose repository 2.5.1 release page.
2.5.0#
{ { < release-date date="2022-04-29" > } }
Bug fixes and enhancements#
- Fixed panic with
compose down
command when-p
flag specified. Fixes #9353. - Passed newly created project as input to start services (
docker compose up
). Fixes #9356. - Included services declared under links in docker-compose file as implicit dependencies. Fixes #9301.
- Added changes
docker compose pull
command to respect defined policy: 1) skip services configured aspull_policy: never
and 2) ignore those with an existing image andpull_policy: missing
. Fixes #3660. - Error building project from resources is no longer ignored in order to prevent
down
panic. Fixes #9383. - Enforced project name to be lowercase. Fixes #9378.
- Added support to build-time secrets. Fixes #6358.
- Changed
compose-go
to allow (re)building volume string to be used by enginebind
API when mount can't be used. Fixes #9380. - Provided checksums.txt file and added
--binary
to allow verification in different OS. Fixes #9388. - Added changes so locally pulled image's ID is inspected and persisted to
com.docker.compose.image
. Fixes #9357. - Fixed issue regarding IPAM gateway setup. Fixes #9330.
- Added support for ppc64le archictecture for docker compose binary.
- Fixed search/replace typo in
--no-TTY
documentation.
For the full change log or additional information, check the Compose repository 2.5.0 release page.
2.4.1#
{ { < release-date date="2022-04-04" > } }
Bug fixes and enhancements#
- Passed the
--rm flag
value as is to the Docker CLI when running a container with this flag. Fixes #9314. - Added ssh config to the build options when building an image from a
docker compose up
command. Fixes #9338. - Added inspection to container checking if a TTY is required. Running services with
tty:true
specified now show console output. Fixes #9288.
For the full change log or additional information, check the Compose repository 2.4.1 release page.
2.4.0#
{ { < release-date date="2022-04-1" > } }
Updates#
- Dependencies update: Bumped buildx to v0.8.1. to fix possible panic on handling build context scanning errors.
Bug fixes and enhancements#
- Passed the interactive flag '-i' from the Compose CLI to the Docker one to run exec command. Fixes #9315.
- Compose commands now take the value of
COMPOSE_PROJECT_NAME
environmental variable into consideration. Fixes #9316. - Fixed issue of
compose down
command that when executed in contexts without any services started or resources to be deleted was returning an error. Error was due to command trying to delete an inexistent default network. Fixes #9333. - Introduced support for
cache_from
,cache_to
,no_cache
andpull
attributes in the build section. These attributes allow forcing a complete rebuild from sources and checking with registry for images used. These changes provide the basis for offering--no-cache
and--pull
options for compose build (or equivalent) command down the line. - Introduced support of an
--ssh
flag for thebuild
command from CLI and Compose file. Fixes #7025. - Fixed typo in
--ssh
flag description. Related to #7025. - Pinned Kubernetes dependencies to the same version as in buildx.
- Passed the interactive flag from the Compose CLI to the Docker one to run exec command.
- Fixed race condition on start-stop end-to-end tests running in parallel.
- Removed code regarding an obsolete warning.
- Vendor: github.com/containerd/containerd v1.6.2. Includes a fix for CVE-2022-24769 (doesn't affect our codebase).
For the full change log or additional information, check the Compose repository 2.4.0 release page.
2.3.4#
{ { < release-date date="2022-03-25" > } }
New#
- Introduced changes to use RunExec and RunStart from docker/cli to handle all the interactive/tty/* terminal logic.
Removed#
- Removed a container with no candidate now produces a warning instead of an error. Fixes #9255.
- Removed the "Deprecated" mentions from -i and -t options to run and exec commands. These options are on by default and in use. Fixes #9229.
- Removed the "Deprecated" mention from the --filter flag, to keep consistency with other commands.
- Removed the need to get the original compose.yaml file to run 'docker compose kill'.
Updates#
- Dependencies update: Bumped github.com/spf13/cobra from 1.3.0 to 1.4.0. Cobra library no longer requires Viper and all of its indirect dependencies See cobra's release page.
- Dependencies update: Bumped buildx from v0.7.1 to v0.8.0.
Bug fixes and enhancements#
- Recovered behavior for 'compose up -d' of recreating containers of compose file images with refreshed content. Fixes #9259.
- Docker compose --status, --filter and --format flags documentation updates.
docker compose down -v
now does not remove external volumes and networks as per the option's expected and documented behavior. Whenever project is specified it is also now used to enforce down to only remove resources listed in compose.yaml file. Fixes #9172, #9145.- Changed Compose API reference docs automation to pick up diffs code vs. docs.
For the full change log or additional information, check the Compose repository 2.3.4 release page.
Other Releases#
(2022-03-8 to 2022-04-14)
For the releases later than 1.29.2 and earlier than 2.3.4, please check the Compose repository release pages.
1.29.2#
(2021-05-10)
Miscellaneous#
-
Removed the prompt to use
docker-compose
in theup
command. -
Bumped
py
to1.10.0
inrequirements-indirect.txt
.
1.29.1#
(2021-04-13)
Bugs#
-
Fixed invalid handler warning on Windows builds.
-
Fixed config hash to trigger container re-creation on IPC mode updates.
-
Fixed conversion map for
placement.max_replicas_per_node
. -
Removed extra scan suggestion on build.
1.29.0#
(2021-04-06)
Features#
-
Added profile filter to
docker-compose config
. -
Added a
depends_on
condition to wait for successful service completion.
Miscellaneous#
-
Added an image scan message on build.
-
Updated warning message for
--no-ansi
to mention--ansi never
as alternative. -
Bumped docker-py to 5.0.0.
-
Bumped PyYAML to 5.4.1.
-
Bumped python-dotenv to 0.17.0.
1.28.6#
(2021-03-23)
Bug fixes#
-
Made
--env-file
relative to the current working directory. Environment file paths set with--env-file
are now relative to the current working directory and override the default.env
file located in the project directory. -
Fixed missing service property
storage_opt
by updating the Compose schema. -
Fixed build
extra_hosts
list format. -
Removed additional error message on
exec
.
Miscellaneous#
- Added
compose.yml
andcompose.yaml
to the default filename list.
1.28.5#
(2021-02-26)
Bugs#
-
Fixed the OpenSSL version mismatch error when shelling out to the SSH client (via bump to docker-py 4.4.4 which contains the fix).
-
Added missing build flags to the native builder:
platform
,isolation
andextra_hosts
. -
Removed info message on native build.
-
Fixed the log fetching bug when service logging driver is set to 'none'.
1.28.4#
(2021-02-18)
Bug fixes#
- Fixed SSH port parsing by bumping docker-py to 4.4.3.
Miscellaneous#
- Bumped Python to 3.7.10.
1.28.3#
(2021-02-17)
Bug fixes#
-
Fixed SSH hostname parsing when it contains a leading 's'/'h', and removed the quiet option that was hiding the error (via docker-py bump to 4.4.2).
-
Fixed key error for
--no-log-prefix
option. -
Fixed incorrect CLI environment variable name for service profiles:
COMPOSE_PROFILES
instead ofCOMPOSE_PROFILE
. -
Fixed the fish completion.
Miscellaneous#
-
Bumped cryptography to 3.3.2.
-
Removed the log driver filter.
For a list of PRs and issues fixed in this release, see Compose 1.28.3.
1.28.2#
(2021-01-26)
Bug fixes#
-
Revert to Python 3.7 bump for Linux static builds
-
Add bash completion for
docker-compose logs|up --no-log-prefix
Miscellaneous#
- CI setup update
1.28.0#
(2021-01-20)
Features#
-
Added support for NVIDIA GPUs through device requests.
-
Added support for service profiles.
-
Changed the SSH connection approach to the Docker CLI by shelling out to the local SSH client. Set the
COMPOSE_PARAMIKO_SSH=1
environment variable to enable the old behavior. -
Added a flag to disable log prefix.
-
Added a flag for ANSI output control.
-
Docker Compose now uses the native Docker CLI's
build
command when building images. Set theCOMPOSE_DOCKER_CLI_BUILD=0
environment variable to disable this feature.
Bug fixes#
-
Made
parallel_pull=True
by default. -
Restored the warning for configs in non-swarm mode.
-
Took
--file
into account when definingproject_dir
. -
Fixed a service attach bug on
compose up
.
Miscellaneous#
-
Added usage metrics.
-
Synced schema with COMPOSE specification.
-
Improved failure report for missing mandatory environment variables.
-
Bumped
attrs
to 20.3.0. -
Bumped
more_itertools
to 8.6.0. -
Bumped
cryptograhy
to 3.2.1. -
Bumped
cffi
to 1.14.4. -
Bumped
virtualenv
to 20.2.2. -
Bumped
bcrypt
to 3.2.0. -
Bumped GitPython to 3.1.11.
-
Bumped
docker-py
to 4.4.1. -
Bumped Python to 3.9.
-
Linux: bumped Debian base image from stretch to buster (required for Python 3.9).
-
macOS: Bumped OpenSSL 1.1.1g to 1.1.1h, and Python 3.7.7 to 3.9.0.
-
Bumped PyInstaller to 4.1.
-
Relaxed the restriction on base images to latest minor.
-
Updated READMEs.
1.27.4#
(2020-09-24)
Bug fixes#
-
Removed path checks for bind mounts.
-
Fixed port rendering to output long form syntax for non-v1.
-
Added protocol to the Docker socket address.
1.27.3#
(2020-09-16)
Bug fixes#
-
Merged
max_replicas_per_node
ondocker-compose config
. -
Fixed
depends_on
serialization ondocker-compose config
. -
Fixed scaling when some containers are not running on
docker-compose up
. -
Enabled relative paths for
driver_opts.device
forlocal
driver. -
Allowed strings for
cpus
fields.
1.27.2#
(2020-09-10)
Bug fixes#
- Fixed bug on
docker-compose run
container attach.
1.27.1#
(2020-09-10)
Bug fixes#
-
Fixed
docker-compose run
whenservice.scale
is specified. -
Allowed the
driver
property for external networks as a temporary workaround for the Swarm network propagation issue. -
Pinned the new internal schema version to
3.9
as the default. -
Preserved the version number configured in the Compose file.
1.27.0#
(2020-09-07)
Features#
-
Merged 2.x and 3.x Compose formats and aligned with
COMPOSE_SPEC
schema. -
Implemented service mode for
ipc
. -
Passed
COMPOSE_PROJECT_NAME
environment variable in container mode. -
Made
run
behave in the same way asup
. -
Used
docker build
ondocker-compose run
whenCOMPOSE_DOCKER_CLI_BUILD
environment variable is set. -
Used the docker-py default API version for engine queries (
auto
). -
Parsed
network_mode
on build.
Bug fixes#
-
Ignored build context path validation when building is not required.
-
Fixed float to bytes conversion via docker-py bump to 4.3.1.
-
Fixed the scale bug when the deploy section is set.
-
Fixed
docker-py
bump insetup.py
. -
Fixed experimental build failure detection.
-
Fixed context propagation to the Docker CLI.
Miscellaneous#
-
Bumped
docker-py
to 4.3.1. -
Bumped
tox
to 3.19.0. -
Bumped
virtualenv
to 20.0.30. -
Added script for Docs synchronization.
1.26.2#
(2020-07-02)
Bug fixes#
- Enforced
docker-py
4.2.2 as minimum version when installing with pip.
1.26.1#
(2020-06-30)
Features#
- Bumped
docker-py
from 4.2.1 to 4.2.2.
Bug fixes#
-
Enforced
docker-py
4.2.1 as minimum version when installing with pip. -
Fixed context load for non-docker endpoints.
1.26.0#
(2020-06-03)
Features#
-
Added
docker context
support. -
Added missing test dependency
ddt
tosetup.py
. -
Added
--attach-dependencies
to commandup
for attaching to dependencies. -
Allowed compatibility option with
COMPOSE_COMPATIBILITY
environment variable. -
Bumped
Pytest
to 5.3.4 and add refactor compatibility with the new version. -
Bumped
OpenSSL
from 1.1.1f to 1.1.1g. -
Bumped
certifi
from 2019.11.28 to 2020.4.5.1. -
Bumped
docker-py
from 4.2.0 to 4.2.1.
Bug fixes#
-
Properly escaped values coming from
env_files
. -
Synchronized compose-schemas with upstream (docker/cli).
-
Removed
None
entries on exec command. -
Added
distro
package to get distro information. -
Added
python-dotenv
to delegate.env
file processing. -
Stopped adjusting output on terminal width when piped into another command.
-
Showed an error message when
version
attribute is malformed. -
Fixed HTTPS connection when
DOCKER_HOST
is remote.
1.25.5#
(2020-04-10)
Features#
-
Bumped OpenSSL from 1.1.1d to 1.1.1f.
-
Added Compose version 3.8.
-
Limited service scale to the size specified by the field
deploy.placement.max_replicas_per_node
.
1.25.4#
(2020-02-03)
Bug fixes#
-
Fixed the CI script to enforce the minimal MacOS version to 10.11.
-
Fixed docker-compose exec for keys with no value on environment files.
1.25.3#
(2020-01-23)
Bug fixes#
-
Fixed the CI script to enforce the compilation with Python3.
-
Updated the binary's sha256 on the release page.
1.25.2#
(2020-01-20)
New features#
- Docker Compose now allows the compatibility option with
COMPOSE_COMPATIBILITY
environment variable.
Bug fixes#
-
Fixed an issue that caused Docker Compose to crash when the
version
field was set to an invalid value. Docker Compose now displays an error message when invalid values are used in the version field. -
Fixed an issue that caused Docker Compose to render messages incorrectly when running commands outside a terminal.
1.25.1#
(2020-01-06)
Bugfixes#
-
Decoded the
APIError
explanation to Unicode before using it to create and start a container. -
Docker Compose discards
com.docker.compose.filepaths
labels that haveNone
as value. This usually occurs when labels originate from stdin. -
Added OS X binary as a directory to solve slow start up time issues caused by macOS Catalina binary scan.
-
Passed the
HOME
environment variable in container mode when running withscript/run/run.sh
. -
Docker Compose now reports images that cannot be pulled, however, are required to be built.
1.25.0#
(2019-11-18)
New features#
-
Set no-colors to true by changing
CLICOLOR
env variable to0
. -
Added working directory, config files, and env file to service labels.
-
Added ARM build dependencies.
-
Added BuildKit support (use
DOCKER_BUILDKIT=1
andCOMPOSE_DOCKER_CLI_BUILD=1
). -
Raised Paramiko to version 2.6.0.
-
Added the following tags:
docker-compose:latest
,docker-compose:<version>-alpine
, anddocker-compose:<version>-debian
. -
Raised
docker-py
to version 4.1.0. -
Enhanced support for
requests
, up to version 2.22.0. -
Removed empty tag on
build:cache_from
. -
Dockerfile
enhancement that provides for the generation oflibmusl
binaries for Alpine Linux. -
Pulling only of images that cannot be built.
-
The
scale
attribute now accepts0
as a value. -
Added a
--quiet
option and a--no-rm
option to thedocker-compose build
command. -
Added a
--no-interpolate
option to thedocker-compose config
command. -
Raised OpenSSL for MacOS build from
1.1.0
to1.1.1c
. -
Added support for the
docker-compose.yml
file'scredential_spec
configuration option. -
Resolution of digests without having to pull the image.
-
Upgraded
pyyaml
to version4.2b1
. -
Lowered the severity to
warning
for instances in whichdown
attempts to remove a non-existent image. -
Mandated the use of improved API fields for project events, when possible.
-
Updated
setup.py
for modernpypi/setuptools
, and removedpandoc
dependencies. -
Removed
Dockerfile.armhf
, which is no longer required.
Bug fixes#
-
Made container service color deterministic, including the removal of the color red.
-
Fixed non-ASCII character errors (Python 2 only).
-
Changed image sizing to decimal format, to align with Docker CLI.
-
tty
size acquired through Python POSIX support. -
Fixed same file
extends
optimization. -
Fixed
stdin_open
. -
Fixed the issue of
--remove-orphans
being ignored encountered during use withup --no-start
option. -
Fixed
docker-compose ps --all
command. -
Fixed the
depends_on
dependency recreation behavior. -
Fixed bash completion for the
docker-compose build --memory
command. -
Fixed the misleading environmental variables warning that occurs when the
docker-compose exec
command is performed. -
Fixed the failure check in the
parallel_execute_watch function
. -
Fixed the race condition that occurs following the pulling of an image.
-
Fixed error on duplicate mount points (a configuration error message now displays).
-
Fixed the merge on
networks
section. -
Compose container is always connected to
stdin
by default. -
Fixed the presentation of failed services on the
docker-compose start
command when containers are not available.
1.24.1#
(2019-06-24)
This release contains minor improvements and bug fixes.
1.24.0#
(2019-03-28)
Features#
-
Added support for connecting to the Docker Engine using the
ssh
protocol. -
Added an
--all
flag todocker-compose ps
to include stopped one-off containers in the command's output. -
Added bash completion for
ps --all|-a
. -
Added support for credential_spec.
-
Added
--parallel
todocker build
's options inbash
andzsh
completion.
Bug fixes#
-
Fixed a bug where some valid credential helpers weren't properly handled by Compose when attempting to pull images from private registries.
-
Fixed an issue where the output of
docker-compose start
before containers were created was misleading. -
Compose will no longer accept whitespace in variable names sourced from environment files. This matches the Docker CLI behavior.
-
Compose will now report a configuration error if a service attempts to declare duplicate mount points in the volumes section.
-
Fixed an issue with the containerized version of Compose that prevented users from writing to stdin during interactive sessions started by
run
orexec
. -
One-off containers started by
run
no longer adopt the restart policy of the service, and are instead set to never restart. -
Fixed an issue that caused some container events to not appear in the output of the
docker-compose events
command. -
Missing images will no longer stop the execution of
docker-compose down
commands. A warning is now displayed instead. -
Force
virtualenv
version for macOS CI. -
Fixed merging of Compose files when network has
None
config. -
Fixed
CTRL+C
issues by enablingbootloader_ignore_signals
inpyinstaller
. -
Bumped
docker-py
version to3.7.2
to fix SSH and proxy configuration issues. -
Fixed release script and some typos on release documentation.
1.23.2#
(2018-11-28)
Bug fixes#
-
Reverted a 1.23.0 change that appended random strings to container names created by
docker-compose up
, causing addressability issues.[!NOTE]: Containers created by
docker-compose run
will continue to use randomly generated names to avoid collisions during parallel runs. -
Fixed an issue where some
dockerfile
paths would fail unexpectedly when attempting to build on Windows. -
Fixed a bug where build context URLs would fail to build on Windows.
-
Fixed a bug that caused
run
andexec
commands to fail for some otherwise accepted values of the--host
parameter. -
Fixed an issue where overrides for the
storage_opt
andisolation
keys in service definitions weren't properly applied. -
Fixed a bug where some invalid Compose files would raise an uncaught exception during validation.
1.23.1#
(2018-11-01)
Bug fixes#
-
Fixed a bug where working with containers created with a version of Compose earlier than
1.23.0
would cause unexpected crashes. -
Fixed an issue where the behavior of the
--project-directory
flag would vary depending on which subcommand was used.
1.23.0#
(2018-10-30)
Important note#
The default naming scheme for containers created by Compose in this version
has changed from <project>_<service>_<index>
to
<project>_<service>_<index>_<slug>
, where <slug>
is a randomly-generated
hexadecimal string. Please make sure to update scripts relying on the old
naming scheme accordingly before upgrading.
Features#
-
Logs for containers restarting after a crash will now appear in the output of the
up
andlogs
commands. -
Added
--hash
option to thedocker-compose config
command, allowing users to print a hash string for each service's configuration to facilitate rolling updates. -
Added
--parallel
flag to thedocker-compose build
command, allowing Compose to build up to 5 images simultaneously. -
Output for the
pull
command now reports status / progress even when pulling multiple images in parallel. -
For images with multiple names, Compose will now attempt to match the one present in the service configuration in the output of the
images
command.
Bug fixes#
-
Fixed an issue where parallel
run
commands for the same service would fail due to name collisions. -
Fixed an issue where paths longer than 260 characters on Windows clients would cause
docker-compose build
to fail. -
Fixed a bug where attempting to mount
/var/run/docker.sock
with Docker Desktop for Windows would result in failure. -
The
--project-directory
option is now used by Compose to determine where to look for the.env
file. -
docker-compose build
no longer fails when attempting to pull an image with credentials provided by the gcloud credential helper. -
Fixed the
--exit-code-from
option indocker-compose up
to always report the actual exit code even when the watched container is not the cause of the exit. -
Fixed an issue that would prevent recreating a service in some cases where a volume would be mapped to the same mountpoint as a volume declared within the Dockerfile for that image.
-
Fixed a bug that caused hash configuration with multiple networks to be inconsistent, causing some services to be unnecessarily restarted.
-
Fixed a bug that would cause failures with variable substitution for services with a name containing one or more dot characters.
-
Fixed a pipe handling issue when using the containerized version of Compose.
-
Fixed a bug causing
external: false
entries in the Compose file to be printed asexternal: true
in the output ofdocker-compose config
. -
Fixed a bug where issuing a
docker-compose pull
command on services without a defined image key would cause Compose to crash. -
Volumes and binds are now mounted in the order they are declared in the service definition.
Miscellaneous#
- The
zsh
completion script has been updated with new options, and no longer suggests container names where service names are expected.
1.22.0#
(2018-07-17)
New features#
Compose format version 3.7#
-
Introduced version 3.7 of the
docker-compose.yml
specification. This version requires Docker Engine 18.06.0 or above. -
Added support for
rollback_config
in the deploy configuration -
Added support for the
init
parameter in service configurations -
Added support for extension fields in service, network, volume, secret, and config configurations
Compose format version 2.4#
- Added support for extension fields in service, network, and volume configurations
Bug fixes#
-
Fixed a bug that prevented deployment with some Compose files when
DOCKER_DEFAULT_PLATFORM
was set -
Compose will no longer try to create containers or volumes with invalid starting characters
-
Fixed several bugs that prevented Compose commands from working properly with containers created with an older version of Compose
-
Fixed an issue with the output of
docker-compose config
with the--compatibility-mode
flag enabled when the source file contains attachable networks -
Fixed a bug that prevented the
gcloud
credential store from working properly when used with the Compose binary on UNIX -
Fixed a bug that caused connection errors when trying to operate over a non-HTTPS TCP connection on Windows
-
Fixed a bug that caused builds to fail on Windows if the Dockerfile was located in a subdirectory of the build context
-
Fixed an issue that prevented proper parsing of UTF-8 BOM encoded Compose files on Windows
-
Fixed an issue with handling of the double-wildcard (
**
) pattern in.dockerignore
files when usingdocker-compose build
-
Fixed a bug that caused auth values in legacy
.dockercfg
files to be ignored docker-compose build
will no longer attempt to create image names starting with an invalid character
1.21.2#
(2018-05-03)
Bug fixes#
- Fixed a bug where the ip_range attribute in IPAM configs was prevented from passing validation
1.21.1#
(2018-04-27)
Bug fixes#
-
In 1.21.0, we introduced a change to how project names are sanitized for internal use in resource names. This caused issues when manipulating an existing, deployed application whose name had changed as a result. This release properly detects resources using "legacy" naming conventions.
-
Fixed an issue where specifying an in-context Dockerfile using an absolute path would fail despite being valid.
-
Fixed a bug where IPAM option changes were incorrectly detected, preventing redeployments.
-
Validation of v2 files now properly checks the structure of IPAM configs.
-
Improved support for credentials stores on Windows to include binaries using extensions other than
.exe
. The list of valid extensions is determined by the contents of thePATHEXT
environment variable. -
Fixed a bug where Compose would generate invalid binds containing duplicate elements with some v3.2 files, triggering errors at the Engine level during deployment.
1.21.0#
(2018-04-11)
New features#
Compose file version 2.4#
-
Introduced version 2.4 of the
docker-compose.yml
specification. This version requires Docker Engine 17.12.0 or above. -
Added support for the
platform
parameter in service definitions. If supplied, the parameter is also used when performing build for the service.
Compose file version 2.2 and up#
- Added support for the
cpu_rt_period
andcpu_rt_runtime
parameters in service definitions (2.x only).
Compose file version 2.1 and up#
-
Added support for the
cpu_period
parameter in service definitions (2.x only). -
Added support for the
isolation
parameter in service build configurations. Additionally, theisolation
parameter in service definitions is used for builds as well if nobuild.isolation
parameter is defined. (2.x only)
All formats#
-
Added support for the
--workdir
flag indocker-compose exec
. -
Added support for the
--compress
flag indocker-compose build
. -
docker-compose pull
is now performed in parallel by default. You can opt out using the--no-parallel
flag. The--parallel
flag is now deprecated and will be removed in a future version. -
Dashes and underscores in project names are no longer stripped out.
-
docker-compose build
now supports the use of Dockerfile from outside the build context.
Bug fixes#
-
Compose now checks that the volume's configuration matches the remote volume, and errors out if a mismatch is detected.
-
Fixed a bug that caused Compose to raise unexpected errors when attempting to create several one-off containers in parallel.
-
Fixed a bug with argument parsing when using
docker-machine config
to generate TLS flags forexec
andrun
commands. -
Fixed a bug where variable substitution with an empty default value (e.g.
${VAR:-}
) would print an incorrect warning. -
Improved resilience when encoding of the Compose file doesn't match the system's. Users are encouraged to use UTF-8 when possible.
-
Fixed a bug where external overlay networks in Swarm would be incorrectly recognized as inexistent by Compose, interrupting otherwise valid operations.
1.20.0#
(2018-03-20)
New features#
Compose file version 3.6#
-
Introduced version 3.6 of the
docker-compose.yml
specification. This version must be used with Docker Engine 18.02.0 or above. -
Added support for the
tmpfs.size
property in volume mappings
Compose file version 3.2 and up#
- The
--build-arg
option can now be used without specifying a service indocker-compose build
Compose file version 2.3#
-
Added support for
device_cgroup_rules
in service definitions -
Added support for the
tmpfs.size
property in long-form volume mappings -
The
--build-arg
option can now be used without specifying a service indocker-compose build
All formats#
-
Added a
--log-level
option to the top-leveldocker-compose
command. Accepted values aredebug
,info
,warning
,error
,critical
. Default log level isinfo
-
docker-compose run
now allows users to unset the container's entrypoint -
Proxy configuration found in the
~/.docker/config.json
file now populates environment and build args for containers created by Compose -
Added the
--use-aliases
flag todocker-compose run
, indicating that network aliases declared in the service's config should be used for the running container -
Added the
--include-deps
flag todocker-compose pull
-
docker-compose run
now kills and removes the running container upon receivingSIGHUP
-
docker-compose ps
now shows the containers' health status if available -
Added the long-form
--detach
option to theexec
,run
andup
commands
Bug fixes#
-
Fixed
.dockerignore
handling, notably with regard to absolute paths and last-line precedence rules -
Fixed an issue where Compose would make costly DNS lookups when connecting to the Engine when using Docker For Mac
-
Fixed a bug introduced in 1.19.0 which caused the default certificate path to not be honored by Compose
-
Fixed a bug where Compose would incorrectly check whether a symlink's destination was accessible when part of a build context
-
Fixed a bug where
.dockerignore
files containing lines of whitespace caused Compose to error out on Windows -
Fixed a bug where
--tls*
and--host
options wouldn't be properly honored for interactiverun
andexec
commands -
A
seccomp:<filepath>
entry in thesecurity_opt
config now correctly sends the contents of the file to the engine -
ANSI output for
up
anddown
operations should no longer affect the wrong lines -
Improved support for non-unicode locales
-
Fixed a crash occurring on Windows when the user's home directory name contained non-ASCII characters
-
Fixed a bug occurring during builds caused by files with a negative
mtime
values in the build context -
Fixed an encoding bug when streaming build progress
1.19.0#
(2018-02-07)
Breaking changes#
- On UNIX platforms, interactive
run
andexec
commands now require thedocker
CLI to be installed on the client by default. To revert to the previous behavior, users may set theCOMPOSE_INTERACTIVE_NO_CLI
environment variable.
New features#
Compose file version 3.x#
- The output of the
config
command should now mergedeploy
options from several Compose files in a more accurate manner
Compose file version 2.3#
- Added support for the
runtime
option in service definitions
Compose file version 2.1 and up#
- Added support for the
${VAR:?err}
and${VAR?err}
variable interpolation syntax to indicate mandatory variables
Compose file version 2.x#
- Added
priority
key to service network mappings, allowing the user to define in which order the specified service will connect to each network
All formats#
-
Added
--renew-anon-volumes
(shorthand-V
) to theup
command, preventing Compose from recovering volume data from previous containers for anonymous volumes -
Added limit for number of simultaneous parallel operations, which should prevent accidental resource exhaustion of the server. Default is 64 and can be configured using the
COMPOSE_PARALLEL_LIMIT
environment variable -
Added
--always-recreate-deps
flag to theup
command to force recreating dependent services along with the dependency owner -
Added
COMPOSE_IGNORE_ORPHANS
environment variable to forgo orphan container detection and suppress warnings -
Added
COMPOSE_FORCE_WINDOWS_HOST
environment variable to force Compose to parse volume definitions as if the Docker host was a Windows system, even if Compose itself is currently running on UNIX -
Bash completion should now be able to better differentiate between running, stopped and paused services
Bug fixes#
-
Fixed a bug that would cause the
build
command to report a connection error when the build context contained unreadable files or FIFO objects. These file types will now be handled appropriately -
Fixed various issues around interactive
run
/exec
sessions. -
Fixed a bug where setting TLS options with environment and CLI flags simultaneously would result in part of the configuration being ignored
-
Fixed a bug where the DOCKER_TLS_VERIFY environment variable was being ignored by Compose
-
Fixed a bug where the
-d
and--timeout
flags inup
were erroneously marked as incompatible -
Fixed a bug where the recreation of a service would break if the image associated with the previous container had been removed
-
Fixed a bug where updating a mount's target would break Compose when trying to recreate the associated service
-
Fixed a bug where
tmpfs
volumes declared using the extended syntax in Compose files using version 3.2 would be erroneously created as anonymous volumes instead -
Fixed a bug where type conversion errors would print a stacktrace instead of exiting gracefully
-
Fixed some errors related to unicode handling
-
Dependent services no longer get recreated along with the dependency owner if their configuration hasn't changed
-
Added better validation of
labels
fields in Compose files. Label values containing scalar types (number, boolean) now get automatically converted to strings
1.18.0#
(2017-12-18)
New features#
Compose file version 3.5#
-
Introduced version 3.5 of the
docker-compose.yml
specification. This version requires Docker Engine 17.06.0 or above -
Added support for the
shm_size
parameter in build configurations -
Added support for the
isolation
parameter in service definitions -
Added support for custom names for network, secret and config definitions
Compose file version 2.3#
-
Added support for
extra_hosts
in build configuration -
Added support for the long syntax for volume entries, as previously introduced in the 3.2 format. Using this syntax will create mounts instead of volumes.
Compose file version 2.1 and up#
-
Added support for the
oom_kill_disable
parameter in service definitions (2.x only) -
Added support for custom names for network definitions (2.x only)
All formats#
-
Values interpolated from the environment will now be converted to the proper type when used in non-string fields.
-
Added support for
--label
indocker-compose run
-
Added support for
--timeout
indocker-compose down
-
Added support for
--memory
indocker-compose build
-
Setting
stop_grace_period
in service definitions now also sets the container'sstop_timeout
Bug fixes#
-
Fixed an issue where Compose was still handling service hostname according to legacy engine behavior, causing hostnames containing dots to be cut up
-
Fixed a bug where the
X-Y:Z
syntax for ports was considered invalid by Compose -
Fixed an issue with CLI logging causing duplicate messages and inelegant output to occur
-
Fixed an issue that caused
stop_grace_period
to be ignored when using multiple Compose files -
Fixed a bug that caused
docker-compose images
to crash when using untagged images -
Fixed a bug where the valid
${VAR:-}
syntax would cause Compose to error out -
Fixed a bug where
env_file
entries using an UTF-8 BOM were being read incorrectly -
Fixed a bug where missing secret files would generate an empty directory in their place
-
Fixed character encoding issues in the CLI's error handlers
-
Added validation for the
test
field in healthchecks -
Added validation for the
subnet
field in IPAM configurations -
Added validation for
volumes
properties when using the long syntax in service definitions -
The CLI now explicit prevents using
-d
and--timeout
together indocker-compose up
1.17.0#
(2017-11-01)
New features#
Compose file version 3.4#
-
Introduced version 3.4 of the
docker-compose.yml
specification. This version requires to be used with Docker Engine 17.06.0 or above. -
Added support for
cache_from
,network
andtarget
options in build configurations -
Added support for the
order
parameter in theupdate_config
section -
Added support for setting a custom name in volume definitions using the
name
parameter
Compose file version 2.3#
- Added support for
shm_size
option in build configuration
Compose file version 2.x#
- Added support for extension fields (
x-*
). Also available for v3.4 files
All formats#
- Added new
--no-start
to theup
command, allowing users to create all resources (networks, volumes, containers) without starting services. Thecreate
command is deprecated in favor of this new option
Bug fixes#
-
Fixed a bug where
extra_hosts
values would be overridden by extension files instead of merging together -
Fixed a bug where the validation for v3.2 files would prevent using the
consistency
field in service volume definitions -
Fixed a bug that would cause a crash when configuration fields expecting unique items would contain duplicates
-
Fixed a bug where mount overrides with a different mode would create a duplicate entry instead of overriding the original entry
-
Fixed a bug where build labels declared as a list wouldn't be properly parsed
-
Fixed a bug where the output of
docker-compose config
would be invalid for some versions if the file contained custom-named external volumes -
Improved error handling when issuing a build command on Windows using an unsupported file version
-
Fixed an issue where networks with identical names would sometimes be created when running
up
commands concurrently.
1.16.0#
(2017-08-31)
New features#
Compose file version 2.3#
-
Introduced version 2.3 of the
docker-compose.yml
specification. This version requires to be used with Docker Engine 17.06.0 or above. -
Added support for the
target
parameter in build configurations -
Added support for the
start_period
parameter in healthcheck configurations
Compose file version 2.x#
-
Added support for the
blkio_config
parameter in service definitions -
Added support for setting a custom name in volume definitions using the
name
parameter (not available for version 2.0)
All formats#
- Added new CLI flag
--no-ansi
to suppress ANSI control characters in output
Bug fixes#
-
Fixed a bug where nested
extends
instructions weren't resolved properly, causing "file not found" errors -
Fixed several issues with
.dockerignore
parsing -
Fixed issues where logs of TTY-enabled services were being printed incorrectly and causing
MemoryError
exceptions -
Fixed a bug where printing application logs would sometimes be interrupted by a
UnicodeEncodeError
exception on Python 3 -
The
$
character in the output ofdocker-compose config
is now properly escaped -
Fixed a bug where running
docker-compose top
would sometimes fail with an uncaught exception -
Fixed a bug where
docker-compose pull
with the--parallel
flag would return a0
exit code when failing -
Fixed an issue where keys in
deploy.resources
were not being validated -
Fixed an issue where the
logging
options in the output ofdocker-compose config
would be set tonull
, an invalid value -
Fixed the output of the
docker-compose images
command when an image would come from a private repository using an explicit port number -
Fixed the output of
docker-compose config
when a port definition used0
as the value for the published port
1.15.0#
(2017-07-26)
New features#
Compose file version 2.2#
- Added support for the
network
parameter in build configurations.
Compose file version 2.1 and up#
-
The
pid
option in a service's definition now supports aservice:<name>
value. -
Added support for the
storage_opt
parameter in service definitions. This option is not available for the v3 format
All formats#
-
Added
--quiet
flag todocker-compose pull
, suppressing progress output -
Some improvements to CLI output
Bug fixes#
-
Volumes specified through the
--volume
flag ofdocker-compose run
now complement volumes declared in the service's definition instead of replacing them -
Fixed a bug where using multiple Compose files would unset the scale value defined inside the Compose file.
-
Fixed an issue where the
credHelpers
entries in theconfig.json
file were not being honored by Compose -
Fixed a bug where using multiple Compose files with port declarations would cause failures in Python 3 environments
-
Fixed a bug where some proxy-related options present in the user's environment would prevent Compose from running
-
Fixed an issue where the output of
docker-compose config
would be invalid if the original file usedY
orN
values -
Fixed an issue preventing
up
operations on a previously created stack on Windows Engine.
1.14.0#
(2017-06-19)
New features#
Compose file version 3.3#
- Introduced version 3.3 of the
docker-compose.yml
specification. This version requires to be used with Docker Engine 17.06.0 or above. Note: thecredential_spec
andconfigs
keys only apply to Swarm services and will be ignored by Compose
Compose file version 2.2#
- Added the following parameters in service definitions:
cpu_count
,cpu_percent
,cpus
Compose file version 2.1#
- Added support for build labels. This feature is also available in the 2.2 and 3.3 formats.
All formats#
-
Added shorthand
-u
for--user
flag indocker-compose exec
-
Differences in labels between the Compose file and remote network will now print a warning instead of preventing redeployment.
Bug fixes#
-
Fixed a bug where service's dependencies were being rescaled to their default scale when running a
docker-compose run
command -
Fixed a bug where
docker-compose rm
with the--stop
flag was not behaving properly when provided with a list of services to remove -
Fixed a bug where
cache_from
in the build section would be ignored when using more than one Compose file. -
Fixed a bug that prevented binding the same port to different IPs when using more than one Compose file.
-
Fixed a bug where override files would not be picked up by Compose if they had the
.yaml
extension -
Fixed a bug on Windows Engine where networks would be incorrectly flagged for recreation
-
Fixed a bug where services declaring ports would cause crashes on some versions of Python 3
-
Fixed a bug where the output of
docker-compose config
would sometimes contain invalid port definitions
1.13.0#
(2017-05-02)
Breaking changes#
docker-compose up
now resets a service's scaling to its default value. You can use the newly introduced--scale
option to specify a custom scale value
New features#
Compose file version 2.2#
-
Introduced version 2.2 of the
docker-compose.yml
specification. This version requires to be used with Docker Engine 1.13.0 or above -
Added support for
init
in service definitions. -
Added support for
scale
in service definitions. The configuration's value can be overridden using the--scale
flag indocker-compose up
. Thescale
command is disabled for this file format
Compose file version 2.x#
- Added support for
options
in theipam
section of network definitions
Bug fixes#
-
Fixed a bug where paths provided to compose via the
-f
option were not being resolved properly -
Fixed a bug where the
ext_ip::target_port
notation in the ports section was incorrectly marked as invalid -
Fixed an issue where the
exec
command would sometimes not return control to the terminal when using the-d
flag -
Fixed a bug where secrets were missing from the output of the
config
command for v3.2 files -
Fixed an issue where
docker-compose
would hang if no internet connection was available -
Fixed an issue where paths containing unicode characters passed via the
-f
flag were causing Compose to crash -
Fixed an issue where the output of
docker-compose config
would be invalid if the Compose file contained external secrets -
Fixed a bug where using
--exit-code-from
withup
would fail if Compose was installed in a Python 3 environment -
Fixed a bug where recreating containers using a combination of
tmpfs
andvolumes
would result in an invalid config state
1.12.0#
(2017-04-04)
New features#
Compose file version 3.2#
-
Introduced version 3.2 of the
docker-compose.yml
specification -
Added support for
cache_from
in thebuild
section of services -
Added support for the new expanded ports syntax in service definitions
-
Added support for the new expanded volumes syntax in service definitions
Compose file version 2.1#
- Added support for
pids_limit
in service definitions
Compose file version 2.0 and up#
-
Added
--volumes
option todocker-compose config
that lists named volumes declared for that project -
Added support for
mem_reservation
in service definitions (2.x only) -
Added support for
dns_opt
in service definitions (2.x only)
All formats#
-
Added a new
docker-compose images
command that lists images used by the current project's containers -
Added a
--stop
(shorthand-s
) option todocker-compose rm
that stops the running containers before removing them -
Added a
--resolve-image-digests
option todocker-compose config
that pins the image version for each service to a permanent digest -
Added a
--exit-code-from SERVICE
option todocker-compose up
. When used,docker-compose
will exit on any container's exit with the code corresponding to the specified service's exit code -
Added a
--parallel
option todocker-compose pull
that enables images for multiple services to be pulled simultaneously -
Added a
--build-arg
option todocker-compose build
-
Added a
--volume <volume_mapping>
(shorthand-v
) option todocker-compose run
to declare runtime volumes to be mounted -
Added a
--project-directory PATH
option todocker-compose
that will affect path resolution for the project -
When using
--abort-on-container-exit
indocker-compose up
, the exit code for the container that caused the abort will be the exit code of thedocker-compose up
command -
Users can now configure which path separator character they want to use to separate the
COMPOSE_FILE
environment value using theCOMPOSE_PATH_SEPARATOR
environment variable -
Added support for port range to a single port in port mappings, such as
8000-8010:80
.
Bug fixes#
-
docker-compose run --rm
now removes anonymous volumes after execution, matching the behavior ofdocker run --rm
. -
Fixed a bug where override files containing port lists would cause a TypeError to be raised
-
Fixed a bug where the
deploy
key would be missing from the output ofdocker-compose config
-
Fixed a bug where scaling services up or down would sometimes re-use obsolete containers
-
Fixed a bug where the output of
docker-compose config
would be invalid if the project declared anonymous volumes -
Variable interpolation now properly occurs in the
secrets
section of the Compose file -
The
secrets
section now properly appears in the output ofdocker-compose config
-
Fixed a bug where changes to some networks properties would not be detected against previously created networks
-
Fixed a bug where
docker-compose
would crash when trying to write into a closed pipe -
Fixed an issue where Compose would not pick up on the value of COMPOSE_TLS_VERSION when used in combination with command-line TLS flags
1.11.2#
(2017-02-17)
Bug fixes#
-
Fixed a bug that was preventing secrets configuration from being loaded properly
-
Fixed a bug where the
docker-compose config
command would fail if the config file contained secrets definitions -
Fixed an issue where Compose on some linux distributions would pick up and load an outdated version of the requests library
-
Fixed an issue where socket-type files inside a build folder would cause
docker-compose
to crash when trying to build that service -
Fixed an issue where recursive wildcard patterns
**
were not being recognized in.dockerignore
files.
1.11.1#
(2017-02-09)
Bug fixes#
- Fixed a bug where the 3.1 file format was not being recognized as valid by the Compose parser
1.11.0#
(2017-02-08)
New Features#
Compose file version 3.1#
- Introduced version 3.1 of the
docker-compose.yml
specification. This version requires Docker Engine 1.13.0 or above. It introduces support for secrets. See the documentation for more information
Compose file version 2.0 and up#
- Introduced the
docker-compose top
command that displays processes running for the different services managed by Compose.
Bug fixes#
-
Fixed a bug where extending a service defining a healthcheck dictionary would cause
docker-compose
to error out. -
Fixed an issue where the
pid
entry in a service definition was being ignored when using multiple Compose files.
1.10.1#
(2017-02-01)
Bug fixes#
-
Fixed an issue where the presence of older versions of the docker-py package would cause unexpected crashes while running Compose
-
Fixed an issue where healthcheck dependencies would be lost when using multiple compose files for a project
-
Fixed a few issues that made the output of the
config
command invalid -
Fixed an issue where adding volume labels to v3 Compose files would result in an error
-
Fixed an issue on Windows where build context paths containing unicode characters were being improperly encoded
-
Fixed a bug where Compose would occasionally crash while streaming logs when containers would stop or restart
1.10.0#
(2017-01-18)
New Features#
Compose file version 3.0#
- Introduced version 3.0 of the
docker-compose.yml
specification. This version requires to be used with Docker Engine 1.13 or above and is specifically designed to work with thedocker stack
commands.
Compose file version 2.1 and up#
-
Healthcheck configuration can now be done in the service definition using the
healthcheck
parameter -
Containers dependencies can now be set up to wait on positive healthchecks when declared using
depends_on
. See the documentation for the updated syntax. Note: This feature will not be ported to version 3 Compose files. -
Added support for the
sysctls
parameter in service definitions -
Added support for the
userns_mode
parameter in service definitions -
Compose now adds identifying labels to networks and volumes it creates
Compose file version 2.0 and up#
- Added support for the
stop_grace_period
option in service definitions.
Bug fixes#
-
Colored output now works properly on Windows.
-
Fixed a bug where docker-compose run would fail to set up link aliases in interactive mode on Windows.
-
Networks created by Compose are now always made attachable (Compose files v2.1 and up).
-
Fixed a bug where falsy values of
COMPOSE_CONVERT_WINDOWS_PATHS
(0
,false
, empty value) were being interpreted as true. -
Fixed a bug where forward slashes in some .dockerignore patterns weren't being parsed correctly on Windows
1.9.0#
(2016-11-16)
Breaking changes
- When using Compose with Docker Toolbox/Machine on Windows, volume paths are
no longer converted from
C:\Users
to/c/Users
-style by default. To re-enable this conversion so that your volumes keep working, set the environment variableCOMPOSE_CONVERT_WINDOWS_PATHS=1
. Users of Docker for Windows are not affected and do not need to set the variable.
New Features#
-
Interactive mode for
docker-compose run
anddocker-compose exec
is now supported on Windows platforms. Thedocker
binary is required to be present on the system for this feature to work. -
Introduced version 2.1 of the
docker-compose.yml
specification. This version requires to be used with Docker Engine 1.12 or above.- Added support for setting volume labels and network labels in
docker-compose.yml
. - Added support for the
isolation
parameter in service definitions. - Added support for link-local IPs in the service networks definitions.
- Added support for shell-style inline defaults in variable interpolation.
The supported forms are
${FOO-default}
(fall back if FOO is unset) and${FOO:-default}
(fall back if FOO is unset or empty).
- Added support for setting volume labels and network labels in
-
Added support for the
group_add
andoom_score_adj
parameters in service definitions. -
Added support for the
internal
andenable_ipv6
parameters in network definitions. -
Compose now defaults to using the
npipe
protocol on Windows. -
Overriding a
logging
configuration will now properly merge theoptions
mappings if thedriver
values do not conflict.
Bug fixes#
-
Fixed several bugs related to
npipe
protocol support on Windows. -
Fixed an issue with Windows paths being incorrectly converted when using Docker on Windows Server.
-
Fixed a bug where an empty
restart
value would sometimes result in an exception being raised. -
Fixed an issue where service logs containing unicode characters would sometimes cause an error to occur.
-
Fixed a bug where unicode values in environment variables would sometimes raise a unicode exception when retrieved.
-
Fixed an issue where Compose would incorrectly detect a configuration mismatch for overlay networks.
1.8.1#
(2016-09-22)
Bug fixes#
-
Fixed a bug where users using a credentials store were not able to access their private images.
-
Fixed a bug where users using identity tokens to authenticate were not able to access their private images.
-
Fixed a bug where an
HttpHeaders
entry in the docker configuration file would cause Compose to crash when trying to build an image. -
Fixed a few bugs related to the handling of Windows paths in volume binding declarations.
-
Fixed a bug where Compose would sometimes crash while trying to read a streaming response from the engine.
-
Fixed an issue where Compose would crash when encountering an API error while streaming container logs.
-
Fixed an issue where Compose would erroneously try to output logs from drivers not handled by the Engine's API.
-
Fixed a bug where options from the
docker-machine config
command would not be properly interpreted by Compose. -
Fixed a bug where the connection to the Docker Engine would sometimes fail when running a large number of services simultaneously.
-
Fixed an issue where Compose would sometimes print a misleading suggestion message when running the
bundle
command. -
Fixed a bug where connection errors would not be handled properly by Compose during the project initialization phase.
-
Fixed a bug where a misleading error would appear when encountering a connection timeout.
1.8.0#
(2016-06-14)
Breaking Changes#
-
As announced in 1.7.0,
docker-compose rm
now removes containers created bydocker-compose run
by default. -
Setting
entrypoint
on a service now empties out any default command that was set on the image (i.e. anyCMD
instruction in the Dockerfile used to build it). This makes it consistent with the--entrypoint
flag todocker run
.
New Features#
-
Added
docker-compose bundle
, a command that builds a bundle file to be consumed by the new Docker Stack commands in Docker 1.12. -
Added
docker-compose push
, a command that pushes service images to a registry. -
Compose now supports specifying a custom TLS version for interaction with the Docker Engine using the
COMPOSE_TLS_VERSION
environment variable.
Bug fixes#
-
Fixed a bug where Compose would erroneously try to read
.env
at the project's root when it is a directory. -
docker-compose run -e VAR
now passesVAR
through from the shell to the container, as withdocker run -e VAR
. -
Improved config merging when multiple compose files are involved for several service sub-keys.
-
Fixed a bug where volume mappings containing Windows drives would sometimes be parsed incorrectly.
-
Fixed a bug in Windows environment where volume mappings of the host's root directory would be parsed incorrectly.
-
Fixed a bug where
docker-compose config
would output an invalid Compose file if external networks were specified. -
Fixed an issue where unset buildargs would be assigned a string containing
'None'
instead of the expected empty value. -
Fixed a bug where yes/no prompts on Windows would not show before receiving input.
-
Fixed a bug where trying to
docker-compose exec
on Windows without the-d
option would exit with a stacktrace. This will still fail for the time being, but should do so gracefully. -
Fixed a bug where errors during
docker-compose up
would show an unrelated stacktrace at the end of the process. -
docker-compose create
anddocker-compose start
show more descriptive error messages when something goes wrong.
1.7.1#
(2016-05-04)
Bug fixes#
-
Fixed a bug where the output of
docker-compose config
for v1 files would be an invalid configuration file. -
Fixed a bug where
docker-compose config
would not check the validity of links. -
Fixed an issue where
docker-compose help
would not output a list of available commands and generic options as expected. -
Fixed an issue where filtering by service when using
docker-compose logs
would not apply for newly created services. -
Fixed a bug where unchanged services would sometimes be recreated in in the up phase when using Compose with Python 3.
-
Fixed an issue where API errors encountered during the up phase would not be recognized as a failure state by Compose.
-
Fixed a bug where Compose would raise a NameError because of an undefined exception name on non-Windows platforms.
-
Fixed a bug where the wrong version of
docker-py
would sometimes be installed alongside Compose. -
Fixed a bug where the host value output by
docker-machine config default
would not be recognized as valid options by thedocker-compose
command line. -
Fixed an issue where Compose would sometimes exit unexpectedly while reading events broadcasted by a Swarm cluster.
-
Corrected a statement in the docs about the location of the
.env
file, which is indeed read from the current directory, instead of in the same location as the Compose file.
1.7.0#
(2016-04-13)
Breaking Changes#
-
docker-compose logs
no longer follows log output by default. It now matches the behavior ofdocker logs
and exits after the current logs are printed. Use-f
to get the old default behavior. -
Booleans are no longer allows as values for mappings in the Compose file (for keys
environment
,labels
andextra_hosts
). Previously this was a warning. Boolean values should be quoted so they become string values.
New Features#
-
Compose now looks for a
.env
file in the directory where it's run and reads any environment variables defined inside, if they're not already set in the shell environment. This lets you easily set defaults for variables used in the Compose file, or for any of theCOMPOSE_*
orDOCKER_*
variables. -
Added a
--remove-orphans
flag to bothdocker-compose up
anddocker-compose down
to remove containers for services that were removed from the Compose file. -
Added a
--all
flag todocker-compose rm
to include containers created bydocker-compose run
. This will become the default behavior in the next version of Compose. -
Added support for all the same TLS configuration flags used by the
docker
client:--tls
,--tlscert
,--tlskey
, etc. -
Compose files now support the
tmpfs
andshm_size
options. -
Added the
--workdir
flag todocker-compose run
-
docker-compose logs
now shows logs for new containers that are created after it starts. -
The
COMPOSE_FILE
environment variable can now contain multiple files, separated by the host system's standard path separator (:
on Mac/Linux,;
on Windows). -
You can now specify a static IP address when connecting a service to a network with the
ipv4_address
andipv6_address
options. -
Added
--follow
,--timestamp
, and--tail
flags to thedocker-compose logs
command. -
docker-compose up
, anddocker-compose start
will now start containers in parallel where possible. -
docker-compose stop
now stops containers in reverse dependency order instead of all at once. -
Added the
--build
flag todocker-compose up
to force it to build a new image. It now shows a warning if an image is automatically built when the flag is not used. -
Added the
docker-compose exec
command for executing a process in a running container.
Bug fixes#
-
docker-compose down
now removes containers created bydocker-compose run
. -
A more appropriate error is shown when a timeout is hit during
up
when using a tty. -
Fixed a bug in
docker-compose down
where it would abort if some resources had already been removed. -
Fixed a bug where changes to network aliases would not trigger a service to be recreated.
-
Fix a bug where a log message was printed about creating a new volume when it already existed.
-
Fixed a bug where interrupting
up
would not always shut down containers. -
Fixed a bug where
log_opt
andlog_driver
were not properly carried over when extending services in the v1 Compose file format. -
Fixed a bug where empty values for build args would cause file validation to fail.
1.6.2#
(2016-02-23)
- Fixed a bug where connecting to a TLS-enabled Docker Engine would fail with a certificate verification error.
1.6.1#
(2016-02-23)
Bug fixes#
-
Fixed a bug where recreating a container multiple times would cause the new container to be started without the previous volumes.
-
Fixed a bug where Compose would set the value of unset environment variables to an empty string, instead of a key without a value.
-
Provide a better error message when Compose requires a more recent version of the Docker API.
-
Add a missing config field
network.aliases
which allows setting a network scoped alias for a service. -
Fixed a bug where
run
would not start services listed independs_on
. -
Fixed a bug where
networks
andnetwork_mode
where not merged when using extends or multiple Compose files. -
Fixed a bug with service aliases where the short container id alias was only contained 10 characters, instead of the 12 characters used in previous versions.
-
Added a missing log message when creating a new named volume.
-
Fixed a bug where
build.args
was not merged when usingextends
or multiple Compose files. -
Fixed some bugs with config validation when null values or incorrect types were used instead of a mapping.
-
Fixed a bug where a
build
section without acontext
would show a stack trace instead of a helpful validation message. -
Improved compatibility with swarm by only setting a container affinity to the previous instance of a services' container when the service uses an anonymous container volume. Previously the affinity was always set on all containers.
-
Fixed the validation of some
driver_opts
would cause an error if a number was used instead of a string. -
Some improvements to the
run.sh
script used by the Compose container install option. -
Fixed a bug with
up --abort-on-container-exit
where Compose would exit, but would not stop other containers. -
Corrected the warning message that is printed when a boolean value is used as a value in a mapping.
1.6.0#
(2016-01-15)
Major Features#
-
Compose 1.6 introduces a new format for
docker-compose.yml
which lets you define networks and volumes in the Compose file as well as services. It also makes a few changes to the structure of some configuration options.You don't have to use it - your existing Compose files will run on Compose 1.6 exactly as they do today.
Check the upgrade guide for full details.
-
Support for networking has exited experimental status and is the recommended way to enable communication between containers.
If you use the new file format, your app will use networking. If you aren't ready yet, just leave your Compose file as it is and it'll continue to work just the same.
By default, you don't have to configure any networks. In fact, using networking with Compose involves even less configuration than using links. Consult the networking guide for how to use it.
The experimental flags
--x-networking
and--x-network-driver
, introduced in Compose 1.5, have been removed. -
You can now pass arguments to a build if you're using the new file format:
build: context: . args: buildno: 1
-
You can now specify both a
build
and animage
key if you're using the new file format.docker-compose build
will build the image and tag it with the name you've specified, whiledocker-compose pull
will attempt to pull it. -
There's a new
events
command for monitoring container events from the application, much likedocker events
. This is a good primitive for building tools on top of Compose for performing actions when particular things happen, such as containers starting and stopping. -
There's a new
depends_on
option for specifying dependencies between services. This enforces the order of startup, and ensures that when you rundocker-compose up SERVICE
on a service with dependencies, those are started as well.
New Features#
-
Added a new command
config
which validates and prints the Compose configuration after interpolating variables, resolving relative paths, and merging multiple files andextends
. -
Added a new command
create
for creating containers without starting them. -
Added a new command
down
to stop and remove all the resources created byup
in a single command. -
Added support for the
cpu_quota
configuration option. -
Added support for the
stop_signal
configuration option. -
Commands
start
,restart
,pause
, andunpause
now exit with an error status code if no containers were modified. -
Added a new
--abort-on-container-exit
flag toup
which causesup
to stop all container and exit once the first container exits. -
Removed support for
FIG_FILE
,FIG_PROJECT_NAME
, and no longer readsfig.yml
as a default Compose file location. -
Removed the
migrate-to-labels
command. -
Removed the
--allow-insecure-ssl
flag.
Bug fixes#
-
Fixed a validation bug that prevented the use of a range of ports in the
expose
field. -
Fixed a validation bug that prevented the use of arrays in the
entrypoint
field if they contained duplicate entries. -
Fixed a bug that caused
ulimits
to be ignored when used withextends
. -
Fixed a bug that prevented ipv6 addresses in
extra_hosts
. -
Fixed a bug that caused
extends
to be ignored when included from multiple Compose files. -
Fixed an incorrect warning when a container volume was defined in the Compose file.
-
Fixed a bug that prevented the force shutdown behavior of
up
andlogs
. -
Fixed a bug that caused
None
to be printed as the network driver name when the default network driver was used. -
Fixed a bug where using the string form of
dns
ordns_search
would cause an error. -
Fixed a bug where a container would be reported as "Up" when it was in the restarting state.
-
Fixed a confusing error message when DOCKER_CERT_PATH was not set properly.
-
Fixed a bug where attaching to a container would fail if it was using a non-standard logging driver (or none at all).
1.5.2#
(2015-12-03)
-
Fixed a bug which broke the use of
environment
andenv_file
withextends
, and caused environment keys without values to have aNone
value, instead of a value from the host environment. -
Fixed a regression in 1.5.1 that caused a warning about volumes to be raised incorrectly when containers were recreated.
-
Fixed a bug which prevented building a
Dockerfile
that usedADD <url>
-
Fixed a bug with
docker-compose restart
which prevented it from starting stopped containers. -
Fixed handling of SIGTERM and SIGINT to properly stop containers
-
Add support for using a url as the value of
build
-
Improved the validation of the
expose
option
1.5.1#
(2015-11-12)
-
Add the
--force-rm
option tobuild
. -
Add the
ulimit
option for services in the Compose file. -
Fixed a bug where
up
would error with "service needs to be built" if a service changed from usingimage
to usingbuild
. -
Fixed a bug that would cause incorrect output of parallel operations on some terminals.
-
Fixed a bug that prevented a container from being recreated when the mode of a
volumes_from
was changed. -
Fixed a regression in 1.5.0 where non-utf-8 unicode characters would cause
up
orlogs
to crash. -
Fixed a regression in 1.5.0 where Compose would use a success exit status code when a command fails due to an HTTP timeout communicating with the docker daemon.
-
Fixed a regression in 1.5.0 where
name
was being accepted as a valid service option which would override the actual name of the service. -
When using
--x-networking
Compose no longer sets the hostname to the container name. -
When using
--x-networking
Compose will only create the default network if at least one container is using the network. -
When printings logs during
up
orlogs
, flush the output buffer after each line to prevent buffering issues from hiding logs. -
Recreate a container if one of its dependencies is being created. Previously a container was only recreated if it's dependencies already existed, but were being recreated as well.
-
Add a warning when a
volume
in the Compose file is being ignored and masked by a container volume from a previous container. -
Improve the output of
pull
when run without a tty. -
When using multiple Compose files, validate each before attempting to merge them together. Previously invalid files would result in not helpful errors.
-
Allow dashes in keys in the
environment
service option. -
Improve validation error messages by including the filename as part of the error message.
1.5.0#
(2015-11-03)
Breaking changes#
With the introduction of variable substitution support in the Compose file, any
Compose file that uses an environment variable ($VAR
or ${VAR}
) in the command:
or entrypoint:
field will break.
Previously these values were interpolated inside the container, with a value from the container environment. In Compose 1.5.0, the values will be interpolated on the host, with a value from the host environment.
To migrate a Compose file to 1.5.0, escape the variables with an extra $
(ex: $$VAR
or $${VAR}
). See
https://github.com/docker/compose/blob/8cc8e61/docs/compose-file.md#variable-substitution
Major features#
-
Compose is now available for Windows.
-
Environment variables can be used in the Compose file. See https://github.com/docker/compose/blob/8cc8e61/docs/compose-file.md#variable-substitution
-
Multiple compose files can be specified, allowing you to override settings in the default Compose file. See https://github.com/docker/compose/blob/8cc8e61/docs/reference/docker-compose.md for more details.
-
Compose now produces better error messages when a file contains invalid configuration.
-
up
now waits for all services to exit before shutting down, rather than shutting down as soon as one container exits. -
Experimental support for the new docker networking system can be enabled with the
--x-networking
flag. Read more here: https://github.com/docker/docker/blob/8fee1c20/docs/userguide/dockernetworks.md
New features#
-
You can now optionally pass a mode to
volumes_from
. For example,volumes_from: ["servicename:ro"]
. -
Since Docker now lets you create volumes with names, you can refer to those volumes by name in
docker-compose.yml
. For example,volumes: ["mydatavolume:/data"]
will mount the volume namedmydatavolume
at the path/data
inside the container.If the first component of an entry in
volumes
starts with a.
,/
or~
, it is treated as a path and expansion of relative paths is performed as necessary. Otherwise, it is treated as a volume name and passed straight through to Docker.Read more on named volumes and volume drivers here: https://github.com/docker/docker/blob/244d9c33/docs/userguide/dockervolumes.md
-
docker-compose build --pull
instructs Compose to pull the base image for each Dockerfile before building. -
docker-compose pull --ignore-pull-failures
instructs Compose to continue if it fails to pull a single service's image, rather than aborting. -
You can now specify an IPC namespace in
docker-compose.yml
with theipc
option. -
Containers created by
docker-compose run
can now be named with the--name
flag. -
If you install Compose with pip or use it as a library, it now works with Python 3.
-
image
now supports image digests (in addition to ids and tags). For example,image: "busybox@sha256:38a203e1986cf79639cfb9b2e1d6e773de84002feea2d4eb006b52004ee8502d"
-
ports
now supports ranges of ports. For example,ports: - "3000-3005" - "9000-9001:8000-8001"
-
docker-compose run
now supports a-p|--publish
parameter, much likedocker run -p
, for publishing specific ports to the host. -
docker-compose pause
anddocker-compose unpause
have been implemented, analogous todocker pause
anddocker unpause
. -
When using
extends
to copy configuration from another service in the same Compose file, you can omit thefile
option. -
Compose can be installed and run as a Docker image. This is an experimental feature.
Bug fixes#
-
All values for the
log_driver
option which are supported by the Docker daemon are now supported by Compose. -
docker-compose build
can now be run successfully against a Swarm cluster.
1.4.2#
(2015-09-22)
- Fixed a regression in the 1.4.1 release that would cause
docker-compose up
without the-d
option to exit immediately.
1.4.1#
(2015-09-10)
Bug fixes#
- Some configuration changes (notably changes to
links
,volumes_from
, andnet
) were not properly triggering a container recreate as part ofdocker-compose up
. docker-compose up <service>
was showing logs for all services instead of just the specified services.- Containers with custom container names were showing up in logs as
service_number
instead of their custom container name. - When scaling a service sometimes containers would be recreated even when the configuration had not changed.
1.4.0#
(2015-08-04)
-
By default,
docker-compose up
now only recreates containers for services whose configuration has changed since they were created. This should result in a dramatic speed-up for many applications.The experimental
--x-smart-recreate
flag which introduced this feature in Compose 1.3.0 has been removed, and a--force-recreate
flag has been added for when you want to recreate everything. -
Several of Compose's commands -
scale
,stop
,kill
andrm
- now perform actions on multiple containers in parallel, rather than in sequence, which will run much faster on larger applications. -
You can now specify a custom name for a service's container with
container_name
. Because Docker container names must be unique, this means you can't scale the service beyond one container. -
You no longer have to specify a
file
option when usingextends
- it will default to the current file. -
Service names can now contain dots, dashes and underscores.
-
Compose can now read YAML configuration from standard input, rather than from a file, by specifying
-
as the filename. This makes it easier to generate configuration dynamically:$ echo 'redis: {"image": "redis"}' | docker-compose --file - up
-
There's a new
docker-compose version
command which prints extended information about Compose's bundled dependencies. -
docker-compose.yml
now supportslog_opt
as well aslog_driver
, allowing you to pass extra configuration to a service's logging driver. -
docker-compose.yml
now supportsmemswap_limit
, similar todocker run --memory-swap
. -
When mounting volumes with the
volumes
option, you can now pass in any mode supported by the daemon, not just:ro
or:rw
. For example, SELinux users can pass:z
or:Z
. -
You can now specify a custom volume driver with the
volume_driver
option indocker-compose.yml
, much likedocker run --volume-driver
. -
A bug has been fixed where Compose would fail to pull images from private registries serving plain (unsecured) HTTP. The
--allow-insecure-ssl
flag, which was previously used to work around this issue, has been deprecated and now has no effect. -
A bug has been fixed where
docker-compose build
would fail if the build depended on a private Hub image or an image from a private registry. -
A bug has been fixed where Compose would crash if there were containers which the Docker daemon had not finished removing.
-
Two bugs have been fixed where Compose would sometimes fail with a "Duplicate bind mount" error, or fail to attach volumes to a container, if there was a volume path specified in
docker-compose.yml
with a trailing slash.
Thanks @mnowster, @dnephin, @ekristen, @funkyfuture, @jeffk and @lukemarsden!
1.3.3#
(2015-07-15)
Regression fixes#
- When stopping containers gracefully, Compose was setting the timeout to 0, effectively forcing a SIGKILL every time.
- Compose would sometimes crash depending on the formatting of container data returned from the Docker API.
1.3.2#
(2015-07-14)
Bug fixes#
- When there were one-off containers created by running
docker-compose run
on an older version of Compose,docker-compose run
would fail with a name collision. Compose now shows an error if you have leftover containers of this type lying around, and tells you how to remove them. - Compose was not reading Docker authentication config files created in the new location,
~/docker/config.json
, and authentication against private registries would therefore fail. - When a container had a pseudo-TTY attached, its output in
docker-compose up
would be truncated. docker-compose up --x-smart-recreate
would sometimes fail when an image tag was updated.docker-compose up
would sometimes create two containers with the same numeric suffix.docker-compose rm
anddocker-compose ps
would sometimes list services that aren't part of the current project (though no containers were erroneously removed).- Some
docker-compose
commands would not show an error if invalid service names were passed in.
Thanks @dano, @josephpage, @kevinsimper, @lieryan, @phemmer, @soulrebel and @sschepens!
1.3.1#
(2015-06-21)
Bug fixes#
docker-compose build
would always attempt to pull the base image before building.docker-compose help migrate-to-labels
failed with an error.- If no network mode was specified, Compose would set it to "bridge", rather than allowing the Docker daemon to use its configured default network mode.
1.3.0#
(2015-06-18)
Important notes#
-
This release contains breaking changes, and you will need to either remove or migrate your existing containers before running your app - see the upgrading section of the install docs for details.
-
Compose now requires Docker 1.6.0 or later.
Improvements#
-
Compose now uses container labels, rather than names, to keep track of containers. This makes Compose both faster and easier to integrate with your own tools.
-
Compose no longer uses "intermediate containers" when recreating containers for a service. This makes
docker-compose up
less complex and more resilient to failure.
New features#
-
docker-compose up
has an experimental new behavior: it will only recreate containers for services whose configuration has changed indocker-compose.yml
. This will eventually become the default, but for now you can take it for a spin:$ docker-compose up --x-smart-recreate
-
When invoked in a subdirectory of a project,
docker-compose
will now climb up through parent directories until it finds adocker-compose.yml
.
Several new configuration keys have been added to docker-compose.yml
:
dockerfile
, likedocker build --file
, lets you specify an alternate Dockerfile to use withbuild
.labels
, likedocker run --labels
, lets you add custom metadata to containers.extra_hosts
, likedocker run --add-host
, lets you add entries to a container's/etc/hosts
file.pid: host
, likedocker run --pid=host
, lets you reuse the same PID namespace as the host machine.cpuset
, likedocker run --cpuset-cpus
, lets you specify which CPUs to allow execution in.read_only
, likedocker run --read-only
, lets you mount a container's filesystem as read-only.security_opt
, likedocker run --security-opt
, lets you specify security options.log_driver
, likedocker run --log-driver
, lets you specify a log driver.
Bug fixes#
- The output of
docker-compose run
was sometimes truncated, especially when running under Jenkins. - A service's volumes would sometimes not update after volume configuration was changed in
docker-compose.yml
. - Authenticating against third-party registries would sometimes fail.
docker-compose run --rm
would fail to remove the container if the service had arestart
policy in place.docker-compose scale
would refuse to scale a service beyond 1 container if it exposed a specific port number on the host.- Compose would refuse to create multiple volume entries with the same host path.
Thanks @ahromis, @albers, @aleksandr-vin, @antoineco, @ccverak, @chernjie, @dnephin, @edmorley, @fordhurley, @josephpage, @KyleJamesWalker, @lsowen, @mchasal, @noironetworks, @sdake, @sdurrheimer, @sherter, @stephenlawrence, @thaJeztah, @thieman, @turtlemonvh, @twhiteman, @vdemeester, @xuxinkun and @zwily!
1.2.0#
(2015-04-16)
-
docker-compose.yml
now supports anextends
option, which enables a service to inherit configuration from another service in another configuration file. This is really good for sharing common configuration between apps, or for configuring the same app for different environments. Here's the documentation. -
When using Compose with a Swarm cluster, containers that depend on one another will be co-scheduled on the same node. This means that most Compose apps will now work out of the box, as long as they don't use
build
. -
Repeated invocations of
docker-compose up
when using Compose with a Swarm cluster now work reliably. -
Directories passed to
build
, filenames passed toenv_file
and volume host paths passed tovolumes
are now treated as relative to the directory of the configuration file, not the directory thatdocker-compose
is being run in. In the majority of cases, those are the same, but if you use the-f|--file
argument to specify a configuration file in another directory, this is a breaking change. -
A service can now share another service's network namespace with
net: container:<service>
. -
volumes_from
andnet: container:<service>
entries are taken into account when resolving dependencies, sodocker-compose up <service>
will correctly start all dependencies of<service>
. -
docker-compose run
now accepts a--user
argument to specify a user to run the command as, just likedocker run
. -
The
up
,stop
andrestart
commands now accept a--timeout
(or-t
) argument to specify how long to wait when attempting to gracefully stop containers, just likedocker stop
. -
docker-compose rm
now accepts-f
as a shorthand for--force
, just likedocker rm
.
Thanks, @abesto, @albers, @alunduil, @dnephin, @funkyfuture, @gilclark, @IanVS, @KingsleyKelly, @knutwalker, @thaJeztah and @vmalloc!
1.1.0#
(2015-02-25)
Fig has been renamed to Docker Compose, or just Compose for short. This has several implications for you:
- The command you type is now
docker-compose
, notfig
. - You should rename your fig.yml to docker-compose.yml.
- If you’re installing via PyPI, the package is now
docker-compose
, so install it withpip install docker-compose
.
Besides that, there’s a lot of new stuff in this release:
-
We’ve made a few small changes to ensure that Compose will work with Swarm, Docker’s new clustering tool (https://github.com/docker/swarm). Eventually you'll be able to point Compose at a Swarm cluster instead of a standalone Docker host and it’ll run your containers on the cluster with no extra work from you. As Swarm is still developing, integration is rough and lots of Compose features don't work yet.
-
docker-compose run
now has a--service-ports
flag for exposing ports on the given service. This is useful for running your webapp with an interactive debugger, for example. -
You can now link to containers outside your app with the
external_links
option in docker-compose.yml. -
You can now prevent
docker-compose up
from automatically building images with the--no-build
option. This will make fewer API calls and run faster. -
If you don’t specify a tag when using the
image
key, Compose will default to thelatest
tag, rather than pulling all tags. -
docker-compose kill
now supports the-s
flag, allowing you to specify the exact signal you want to send to a service’s containers. -
docker-compose.yml now has an
env_file
key, analogous todocker run --env-file
, letting you specify multiple environment variables in a separate file. This is great if you have a lot of them, or if you want to keep sensitive information out of version control. -
docker-compose.yml now supports the
dns_search
,cap_add
,cap_drop
,cpu_shares
andrestart
options, analogous todocker run
’s--dns-search
,--cap-add
,--cap-drop
,--cpu-shares
and--restart
options. -
Compose now ships with Bash tab completion - see the installation and usage docs at https://github.com/docker/compose/blob/1.1.0/docs/completion.md
-
A number of bugs have been fixed - see the milestone for details: https://github.com/docker/compose/issues?q=milestone%3A1.1.0+
Thanks @dnephin, @squebe, @jbalonso, @raulcd, @benlangfield, @albers, @ggtools, @bersace, @dtenenba, @petercv, @drewkett, @TFenby, @paulRbr, @Aigeruth and @salehe!
1.0.1#
(2014-11-04)
- Added an
--allow-insecure-ssl
option to allowfig up
,fig run
andfig pull
to pull from insecure registries. - Fixed
fig run
not showing output in Jenkins. - Fixed a bug where Fig couldn't build Dockerfiles with ADD statements pointing at URLs.
1.0.0#
(2014-10-16)
The highlights:
- Fig has joined Docker. Fig will continue to be maintained, but we'll also be incorporating the best bits of Fig into Docker itself.
This means the GitHub repository has moved to https://github.com/docker/fig and our IRC channel is now #docker-fig on Freenode.
-
Fig can be used with the official Docker OS X installer. Boot2Docker will mount the home directory from your host machine so volumes work as expected.
-
Fig supports Docker 1.3.
-
It is now possible to connect to the Docker daemon using TLS by using the
DOCKER_CERT_PATH
andDOCKER_TLS_VERIFY
environment variables. -
There is a new
fig port
command which outputs the host port binding of a service, in a similar way todocker port
. -
There is a new
fig pull
command which pulls the latest images for a service. -
There is a new
fig restart
command which restarts a service's containers. -
Fig creates multiple containers in service by appending a number to the service name. For example,
db_1
,db_2
. As a convenience, Fig will now give the first container an alias of the service name. For example,db
.
This link alias is also a valid hostname and added to /etc/hosts
so you can connect to linked services using their hostname. For example, instead of resolving the environment variables DB_PORT_5432_TCP_ADDR
and DB_PORT_5432_TCP_PORT
, you could just use the hostname db
and port 5432
directly.
-
Volume definitions now support
ro
mode, expanding~
and expanding environment variables. -
.dockerignore
is supported when building. -
The project name can be set with the
FIG_PROJECT_NAME
environment variable. -
The
--env
and--entrypoint
options have been added tofig run
. -
The Fig binary for Linux is now linked against an older version of glibc so it works on CentOS 6 and Debian Wheezy.
Other things:
fig ps
now works on Jenkins and makes fewer API calls to the Docker daemon.--verbose
displays more useful debugging output.- When starting a service where
volumes_from
points to a service without any containers running, that service will now be started. - Lots of docs improvements. Notably, environment variables are documented and official repositories are used throughout.
Thanks @dnephin, @d11wtq, @marksteve, @rubbish, @jbalonso, @timfreund, @alunduil, @mieciu, @shuron, @moss, @suzaku and @chmouel! Whew.
0.5.2#
(2014-07-28)
- Added a
--no-cache
option tofig build
, which bypasses the cache just likedocker build --no-cache
. - Fixed the
dns:
fig.yml option, which was causing fig to error out. - Fixed a bug where fig couldn't start under Python 2.6.
- Fixed a log-streaming bug that occasionally caused fig to exit.
Thanks @dnephin and @marksteve!
0.5.1#
(2014-07-11)
- If a service has a command defined,
fig run [service]
with no further arguments will run it. - The project name now defaults to the directory containing fig.yml, not the current working directory (if they're different)
volumes_from
now works properly with containers as well as services- Fixed a race condition when recreating containers in
fig up
Thanks @ryanbrainard and @d11wtq!
0.5.0#
(2014-07-11)
- Fig now starts links when you run
fig run
orfig up
.
For example, if you have a web
service which depends on a db
service, fig run web ...
will start the db
service.
- Environment variables can now be resolved from the environment that Fig is running in. Just specify it as a blank variable in your
fig.yml
and, if set, it'll be resolved:
yaml
environment:
RACK_ENV: development
SESSION_SECRET:
volumes_from
is now supported infig.yml
. All of the volumes from the specified services and containers will be mounted:
yaml
volumes_from:
- service_name
- container_name
- A host address can now be specified in
ports
:
yaml
ports:
- "0.0.0.0:8000:8000"
- "127.0.0.1:8001:8001"
- The
net
andworkdir
options are now supported infig.yml
. - The
hostname
option now works in the same way as the Docker CLI, splitting out into adomainname
option. - TTY behavior is far more robust, and resizes are supported correctly.
- Load YAML files safely.
Thanks to @d11wtq, @ryanbrainard, @rail44, @j0hnsmith, @binarin, @Elemecca, @mozz100 and @marksteve for their help with this release!
0.4.2#
(2014-06-18)
- Fix various encoding errors when using
fig run
,fig up
andfig build
.
0.4.1#
(2014-05-08)
- Add support for Docker 0.11.0. (Thanks @marksteve!)
- Make project name configurable. (Thanks @jefmathiot!)
- Return correct exit code from
fig run
.
0.4.0#
(2014-04-29)
- Support Docker 0.9 and 0.10
- Display progress bars correctly when pulling images (no more ski slopes)
fig up
now stops all services when any container exits- Added support for the
privileged
config option in fig.yml (thanks @kvz!) - Shortened and aligned log prefixes in
fig up
output - Only containers started with
fig run
link back to their own service - Handle UTF-8 correctly when streaming
fig build/run/up
output (thanks @mauvm and @shanejonas!) - Error message improvements
0.3.2#
(2014-03-05)
- Added an
--rm
option tofig run
. (Thanks @marksteve!) - Added an
expose
option tofig.yml
.
0.3.1#
(2014-03-04)
- Added contribution instructions. (Thanks @kvz!)
- Fixed
fig rm
throwing an error. - Fixed a bug in
fig ps
on Docker 0.8.1 when there is a container with no command.
0.3.0#
(2014-03-03)
- We now ship binaries for OS X and Linux. No more having to install with Pip!
- Add
-f
flag to specify alternatefig.yml
files - Add support for custom link names
- Fix a bug where recreating would sometimes hang
- Update docker-py to support Docker 0.8.0.
- Various documentation improvements
- Various error message improvements
Thanks @marksteve, @Gazler and @teozkr!
0.2.2#
(2014-02-17)
- Resolve dependencies using Cormen/Tarjan topological sort
- Fix
fig up
not printing log output - Stop containers in reverse order to starting
- Fix scale command not binding ports
Thanks to @barnybug and @dustinlacewell for their work on this release.
0.2.1#
(2014-02-04)
- General improvements to error reporting (#77, #79)
0.2.0#
(2014-01-31)
- Link services to themselves so run commands can access the running service. (#67)
- Much better documentation.
- Make service dependency resolution more reliable. (#48)
- Load Fig configurations with a
.yaml
extension. (#58)
Big thanks to @cameronmaske, @mrchrisadams and @damianmoore for their help with this release.
0.1.4#
(2014-01-27)
- Add a link alias without the project name. This makes the environment variables a little shorter:
REDIS_1_PORT_6379_TCP_ADDR
. (#54)
0.1.3#
(2014-01-23)
- Fix ports sometimes being configured incorrectly. (#46)
- Fix log output sometimes not displaying. (#47)
0.1.2#
(2014-01-22)
- Add
-T
option tofig run
to disable pseudo-TTY. (#34) - Fix
fig up
requiring the ubuntu image to be pulled to recreate containers. (#33) Thanks @cameronmaske! - Improve reliability, fix arrow keys and fix a race condition in
fig run
. (#34, #39, #40)
0.1.1#
(2014-01-17)
- Fix bug where ports were not exposed correctly (#29). Thanks @dustinlacewell!
0.1.0#
(2014-01-16)
- Containers are recreated on each
fig up
, ensuring config is up-to-date withfig.yml
(#2) - Add
fig scale
command (#9) - Use
DOCKER_HOST
environment variable to find Docker daemon, for consistency with the official Docker client (was previouslyDOCKER_URL
) (#19) - Truncate long commands in
fig ps
(#18) - Fill out CLI help banners for commands (#15, #16)
- Show a friendlier error when
fig.yml
is missing (#4) - Fix bug with
fig build
logging (#3) - Fix bug where builds would time out if a step took a long time without generating output (#6)
- Fix bug where streaming container output over the Unix socket raised an error (#7)
Big thanks to @tomstuart, @EnTeQuAk, @schickling, @aronasorman and @GeoffreyPlitt.
0.0.2#
(2014-01-02)
- Improve documentation
- Try to connect to Docker on
tcp://localdocker:4243
and a UNIX socket in addition tolocalhost
. - Improve
fig up
behavior - Add confirmation prompt to
fig rm
- Add
fig build
command
0.0.1#
(2013-12-20)
Initial release.