Set, use, and manage variables in a Compose file with interpolation

A Compose file can use variables to offer more flexibility. If you want to quickly switch between image tags to test multiple versions, or want to adjust a volume source to your local environment, you don't need to edit the Compose file each time, you can just set variables that insert values into your Compose file at run time.

Interpolation can also be used to insert values into your Compose file at run time, which is then used to pass variables into your container's environment

Below is a simple example:

$ cat .env
TAG=v1.5
$ cat compose.yml
services:
  web:
    image: "webapp:${TAG}"

When you run docker compose up, the web service defined in the Compose file interpolates in the image webapp:v1.5 which was set in the .env file. You can verify this with the config command, which prints your resolved application config to the terminal:

$ docker compose config
services:
  web:
    image: 'webapp:v1.5'

Interpolation syntax#

Interpolation is applied for unquoted and double-quoted values. Both braced (${VAR}) and unbraced ($VAR) expressions are supported.

For braced expressions, the following formats are supported: - Direct substitution - ${VAR} -> value of VAR - Default value - ${VAR:-default} -> value of VAR if set and non-empty, otherwise default - ${VAR-default} -> value of VAR if set, otherwise default - Required value - ${VAR:?error} -> value of VAR if set and non-empty, otherwise exit with error - ${VAR?error} -> value of VAR if set, otherwise exit with error - Alternative value - ${VAR:+replacement} -> replacement if VAR is set and non-empty, otherwise empty - ${VAR+replacement} -> replacement if VAR is set, otherwise empty

For more information, see Interpolation in the Compose Specification.

Ways to set variables with interpolation#

Docker Compose can interpolate variables into your Compose file from multiple sources.

Note that when the same variable is declared by multiple sources, precedence applies:

Variables from your shell environment
If --env-file is not set, variables set by an .env file in local working directory (PWD)
Variables from a file set by --env-file or an .env file in project directory

You can check variables and values used by Compose to interpolate the Compose model by running docker compose config --environment.

`.env` file#

An .env file in Docker Compose is a text file used to define variables that should be made available for interpolation when running docker compose up. This file typically contains key-value pairs of variables, and it lets you centralize and manage configuration in one place. The .env file is useful if you have multiple variables you need to store.

The .env file is the default method for setting variables. The .env file should be placed at the root of the project directory next to your compose.yaml file. For more information on formatting an environment file, see Syntax for environment files.

Basic example:

$ cat .env
## define COMPOSE_DEBUG based on DEV_MODE, defaults to false
COMPOSE_DEBUG=${DEV_MODE:-false}

$ cat compose.yaml
  services:
    webapp:
      image: my-webapp-image
      environment:
        - DEBUG=${COMPOSE_DEBUG}

$ DEV_MODE=true docker compose config
services:
  webapp:
    environment:
      DEBUG: "true"

Additional information#

If you define a variable in your .env file, you can reference it directly in your compose.yml with the environment attribute. For example, if your .env file contains the environment variable DEBUG=1 and your compose.yml file looks like this: yaml services: webapp: image: my-webapp-image environment: - DEBUG=${DEBUG} Docker Compose replaces ${DEBUG} with the value from the .env file

[!IMPORTANT]

Be aware of Environment variables precedence when using variables in an .env file that as environment variables in your container's environment.

You can place your .env file in a location other than the root of your project's directory, and then use the --env-file option in the CLI so Compose can navigate to it.
Your .env file can be overridden by another .env if it is substituted with --env-file.

[!IMPORTANT]

Substitution from .env files is a Docker Compose CLI feature.

It is not supported by Swarm when running docker stack deploy.

`.env` file syntax#

The following syntax rules apply to environment files:

Lines beginning with # are processed as comments and ignored.
Blank lines are ignored.
Unquoted and double-quoted (") values have interpolation applied.
Each line represents a key-value pair. Values can optionally be quoted.
VAR=VAL -> VAL
VAR="VAL" -> VAL
VAR='VAL' -> VAL
Inline comments for unquoted values must be preceded with a space.
VAR=VAL # comment -> VAL
VAR=VAL# not a comment -> VAL# not a comment
Inline comments for quoted values must follow the closing quote.
VAR="VAL # not a comment" -> VAL # not a comment
VAR="VAL" # comment -> VAL
Single-quoted (') values are used literally.
VAR='$OTHER' -> $OTHER
VAR='${OTHER}' -> ${OTHER}
Quotes can be escaped with \.
VAR='Let\'s go!' -> Let's go!
VAR="{\"hello\": \"json\"}" -> {"hello": "json"}
Common shell escape sequences including \n, \r, \t, and \\ are supported in double-quoted values.
VAR="some\tvalue" -> some value
VAR='some\tvalue' -> some\tvalue
VAR=some\tvalue -> some\tvalue

Substitute with `--env-file`#

You can set default values for multiple environment variables, in an .env file and then pass the file as an argument in the CLI.

The advantage of this method is that you can store the file anywhere and name it appropriately, for example, This file path is relative to the current working directory where the Docker Compose command is executed. Passing the file path is done using the --env-file option:

$ docker compose --env-file ./config/.env.dev up

Additional information#

This method is useful if you want to temporarily override an .env file that is already referenced in your compose.yml file. For example you may have different .env files for production ( .env.prod) and testing (.env.test). In the following example, there are two environment files, .env and .env.dev. Both have different values set for TAG. console $ cat .env TAG=v1.5 $ cat ./config/.env.dev TAG=v1.6 $ cat compose.yml services: web: image: "webapp:${TAG}" If the --env-file is not used in the command line, the .env file is loaded by default: console $ docker compose config services: web: image: 'webapp:v1.5' Passing the --env-file argument overrides the default file path: console $ docker compose --env-file ./config/.env.dev config services: web: image: 'webapp:v1.6' When an invalid file path is being passed as an --env-file argument, Compose returns an error: console $ docker compose --env-file ./doesnotexist/.env.dev config ERROR: Couldn't find env file: /home/user/./doesnotexist/.env.dev
You can use multiple --env-file options to specify multiple environment files, and Docker Compose reads them in order. Later files can override variables from earlier files. console $ docker compose --env-file .env --env-file .env.override up
You can override specific environment variables from the command line when starting containers. console $ docker compose --env-file .env.dev up -e DATABASE_URL=mysql://new_user:new_password@new_db:3306/new_database

local `.env` file versus `.env` file#

An .env file can also be used to declare pre-defined environment variables used to control Compose behavior and files to be loaded.

When executed without an explicit --env-file flag, Compose searches for an .env file in your working directory (PWD) and loads values both for self-configuration and interpolation. If the values in this file define the COMPOSE_FILE pre-defined variable, which results in a project directory being set to another folder, Compose will load a second .env file, if present. This second .env file has a lower precedence.

This mechanism makes it possible to invoke an existing Compose project with a custom set of variables as overrides, without the need to pass environment variables by the command line.

$ cat .env
COMPOSE_FILE=../compose.yaml
POSTGRES_VERSION=9.3

$ cat ../compose.yaml
services:
  db:
    image: "postgres:${POSTGRES_VERSION}"
$ cat ../.env
POSTGRES_VERSION=9.2

$ docker compose config
services:
  db:
    image: "postgres:9.3"

Substitute from the shell#

You can use existing environment variables from your host machine or from the shell environment where you execute docker compose commands. This lets you dynamically inject values into your Docker Compose configuration at runtime. For example, suppose the shell contains POSTGRES_VERSION=9.3 and you supply the following configuration:

db:
  image: "postgres:${POSTGRES_VERSION}"

When you run docker compose up with this configuration, Compose looks for the POSTGRES_VERSION environment variable in the shell and substitutes its value in. For this example, Compose resolves the image to postgres:9.3 before running the configuration.

If an environment variable is not set, Compose substitutes with an empty string. In the previous example, if POSTGRES_VERSION is not set, the value for the image option is postgres:.

[!NOTE]

postgres: is not a valid image reference. Docker expects either a reference without a tag, like postgres which defaults to the latest image, or with a tag such as postgres:15.

Interpolation syntax#

Ways to set variables with interpolation#

.env file#

Additional information#

.env file syntax#

Substitute with --env-file#

Additional information#

local .env file versus .env file#

Substitute from the shell#

`.env` file#

`.env` file syntax#

Substitute with `--env-file`#

local `.env` file versus `.env` file#